c4 tranny swap i need to pull the wheels

goodyear1984 · 12-17-2007, 01:56 AM

thanks or the info.i think i am goin to get the tranny soon .how long have u had the redneck tranny for,any problems

ustahava67 · 12-17-2007, 11:52 PM

I had a couple of minor issues. The pan gasket was overtorqued. I also got the trans with a stock bell for a 164 tooth flywheel. The bolts that hold the bell to the trans shook loose after about 20 runs. Make sure that you loctite the bolts before you put it in the car. On my car going from an AOD w/ 3000 stall to the C-4 w/ 4000 stall netted me 5 tenths in the 1/4. Car went from a 13.30 to a 12.80.

goodyear1984 · 12-19-2007, 02:22 AM

kool man i hope i get 5 tenths.im at a 11.8 now so a 11.3 would be nice

12-17-2007, 01:56 AM	#1
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: c4 tranny swap i need to pull the wheels thanks or the info.i think i am goin to get the tranny soon .how long have u had the redneck tranny for,any problems __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

12-17-2007, 11:52 PM	#2
ustahava67 Registered Member Join Date: Jun 2007 Posts: 8	Re: c4 tranny swap i need to pull the wheels I had a couple of minor issues. The pan gasket was overtorqued. I also got the trans with a stock bell for a 164 tooth flywheel. The bolts that hold the bell to the trans shook loose after about 20 runs. Make sure that you loctite the bolts before you put it in the car. On my car going from an AOD w/ 3000 stall to the C-4 w/ 4000 stall netted me 5 tenths in the 1/4. Car went from a 13.30 to a 12.80.

12-19-2007, 02:22 AM	#3
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: c4 tranny swap i need to pull the wheels kool man i hope i get 5 tenths.im at a 11.8 now so a 11.3 would be nice __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tranny swap?	03stangGT	Modular Madness	7	11-19-2006 08:57 AM
5 lug swap,what wheels will fit my stang?	arron	Appearance & Detailing	0	07-17-2004 01:21 PM
Pull the tranny or lift the block?	Fox Body	Windsor Power	2	11-12-2003 01:19 PM
need help with tranny swap.	71grande	Classic Mustangs	0	07-25-2002 07:30 PM
Tranny Swap	ozmosis111	Small Ponies	1	04-26-2001 03:18 PM