Max horsepower.

goodyear1984 · 09-25-2008, 09:18 PM

my buddys car has 332 (6500rpm) at the wheels on his 97.we ported the heads,had them milled and ran a thinner gasket to bring the cr to 11to1. comp springs and custom cams.typhoon intake ,port matched and t-body.has a bigger fp and injectors and was tuned.it has some other bolt ons but thats the basis on what made the power .yea it cost more that 2 grand but u gotta pay to play

jivepepper · 10-08-2008, 05:07 AM

Quote:

Originally Posted by goodyear1984

my buddys car has 332 (6500rpm) at the wheels on his 97.we ported the heads,had them milled and ran a thinner gasket to bring the cr to 11to1. comp springs and custom cams.typhoon intake ,port matched and t-body.has a bigger fp and injectors and was tuned.it has some other bolt ons but thats the basis on what made the power .yea it cost more that 2 grand but u gotta pay to play

Well he wasn't using bolt ons.

goodyear1984 · 10-12-2008, 11:24 PM

srry i just looked at my last reply it was 382 not 332...what is your explaination of "bolt on" a cold air intake?lmao.its not like we did a stroker motor.ok spent 100 bucks to get the heads milled and did a port job and bolted them on.u gotta but money where it counts compression and air flow!!!not cold air intakes and underdrive pulleys

explicitone · 10-13-2008, 07:41 PM

Quote:

Originally Posted by goodyear1984

srry i just looked at my last reply it was 382 not 332...what is your explaination of "bolt on" a cold air intake?lmao.its not like we did a stroker motor.ok spent 100 bucks to get the heads milled and did a port job and bolted them on.u gotta but money where it counts compression and air flow!!!not cold air intakes and underdrive pulleys

not to call you out but I dont buy 382 to the wheels out of a stock shortblock 2v with heads putting down 382

plus it would take a lot of milling and a real thin head gasket to get 11 to 1 unless your talking pi swap as well... but even then I dont see it.... if he got that much power then he should be real proud cause thats about 40 to 50 more rwhp on a stock shortblock 2v that I have ever seen posted.... I think thats inline with what ken B put down with a full built motor with race heads and intake

jivepepper · 10-13-2008, 07:54 PM

Quote:

Originally Posted by explicitone

not to call you out but I dont buy 382 to the wheels out of a stock shortblock 2v with heads putting down 382

plus it would take a lot of milling and a real thin head gasket to get 11 to 1 unless your talking pi swap as well... but even then I dont see it.... if he got that much power then he should be real proud cause thats about 40 to 50 more rwhp on a stock shortblock 2v that I have ever seen posted.... I think thats inline with what ken B put down with a full built motor with race heads and intake

+10000 No way in hell. Maybe 300

09-25-2008, 09:18 PM	#1
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Max horsepower. my buddys car has 332 (6500rpm) at the wheels on his 97.we ported the heads,had them milled and ran a thinner gasket to bring the cr to 11to1. comp springs and custom cams.typhoon intake ,port matched and t-body.has a bigger fp and injectors and was tuned.it has some other bolt ons but thats the basis on what made the power .yea it cost more that 2 grand but u gotta pay to play __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

10-12-2008, 11:24 PM	#3
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Max horsepower. srry i just looked at my last reply it was 382 not 332...what is your explaination of "bolt on" a cold air intake?lmao.its not like we did a stroker motor.ok spent 100 bucks to get the heads milled and did a port job and bolted them on.u gotta but money where it counts compression and air flow!!!not cold air intakes and underdrive pulleys __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Horsepower	Sknight579	Classic Mustangs	1	01-12-2004 07:50 AM
how much horsepower	84gt347	Windsor Power	5	01-10-2004 12:29 PM
2,000-plus horsepower!	Nitrous Al	Blue Oval Lounge	6	12-16-2001 08:31 PM
how much horsepower?	StripedStangLX	Blue Oval Lounge	3	03-14-2001 03:42 PM
How much horsepower?	stangbang	Windsor Power	3	02-28-2001 07:43 PM