stock heads blown..now what?

teal9550 · 11-27-2008, 05:34 PM

i used power heads E7's on my 95 gt with a stock cam & bottom end with 1.7 rockers tfs intake 24lb injectors 65mm tb and 100 shot of nos(dry kit) went 12.49 @ 114mph on drag raidials. this was a daily driver and everything installed like stock and no questions at smog time

goodyear1984 · 12-04-2008, 11:15 PM

not douting the e7's i ported mine and had a 150 shot and ran 11.89 but there just not worth 800 bucks.i mean for a little over 1200 you can get trick flow heads and gain flow and compression, cuz i think you can get them in a 58cc and with a thinner head gasket that is over 1 full compression point which 1 point could be worth 40 flywheel hp

goodyear1984 · 12-04-2008, 11:16 PM

depending on your set up obviously

11-27-2008, 05:34 PM	#1
teal9550 Registered Member Join Date: Feb 2006 Posts: 4	Re: stock heads blown..now what? i used power heads E7's on my 95 gt with a stock cam & bottom end with 1.7 rockers tfs intake 24lb injectors 65mm tb and 100 shot of nos(dry kit) went 12.49 @ 114mph on drag raidials. this was a daily driver and everything installed like stock and no questions at smog time

12-04-2008, 11:15 PM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: stock heads blown..now what? not douting the e7's i ported mine and had a 150 shot and ran 11.89 but there just not worth 800 bucks.i mean for a little over 1200 you can get trick flow heads and gain flow and compression, cuz i think you can get them in a 58cc and with a thinner head gasket that is over 1 full compression point which 1 point could be worth 40 flywheel hp __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

12-04-2008, 11:16 PM	#3
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: stock heads blown..now what? depending on your set up obviously __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cylinder heads for blown 331	Dave_mustang_50	Windsor Power	7	06-18-2003 03:45 PM
gt40 heads vs stock heads	scale	Windsor Power	6	04-03-2003 06:58 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
Damaged heads or blown head gasket	silverstang96	Modular Madness	4	10-15-2001 08:50 AM
? on stock heads	vande97	Windsor Power	12	06-21-2001 11:35 PM