Engine builders please help

[Rick 91GT]

One thing you might want to check is the bushing in the distributor, not sure why it is only in the low rpms but it worth checking. I have seen these squeak/squeal when it goes bad. You really need to try to pin point the noise this will help.

Good Luck,

Rick

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree