Dyno proven 450-475 HP. ET Guesses???

[SaleenGTS]

Originally posted by 1BAD89:



There is no way that combo. will make 450-475hp! I would not let this guy build my engine if I were you. That hp that he told you is sooooo far off from the actual hp you'd have, it's kinda scary! Especially with 9:1 CR! OMG, that is A TOTAL BS PACKAGE! You'd have to have a supercharger to even come close to those numbers. Let's compare.....D.S.S.'s PRO BULLET 306 puts out 400hp and 365 ft lbs, and that's one bad a$$ engine, with all the high dollar parts.
You've been warned.

***Engine: Steal Mounts

Shouldn't that be "steel mounts"? Just trying to help you out a little bit.

I will disagree with you there. I have a friend that made 393 rwhp (450-475 crank hp) with a Coast Street Fighter 306 with a Stage 3 Ported Holley Intake with a 1" spacer, Totally ported Canfields, a wicked cam, 1.7 rockers, DFI, and some other Top of the line things. Granted this wasn't a very streetable car and he had high compression, but he hit 390 at the tires, but at high RPM's.

I wouldn't go for that with all motor. you wouldn't be able to use it on the street. You will need to keep your power under 6300 for a street car to be effective.

------------------
Dustin
89 Saleen GT Sport,347, TFS Street Heat Intake(port matched),TFS TW Heads(Stage 2),TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

516 rwhp
553 rwtq

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

12.3@119 street tires OLD MOTOR

11.496@121.08slicks OLD MOTOR