engine's ready--can't wait

66fastback · 07-08-1999, 01:59 AM

It's got an 8" rear end. I picked up the 3.40's at a track event in Tulsa. I haven't seen anybody selling a set like this either--at least not new.

The 5-speed is a T-5 unit from an 1988 Mustang. Any 5 speed from these cars made from 1985 or so to 1994 will work. If you are going to buy one used, look for one from at least 89 or 90 up. These are a little bit stronger than the older one's, but I haven't had any trouble from mine....nearly 100,000 miles and counting. I use Redline MTL synthetic in it, which some of the late model folks think is a no-no. I have a high mileage tranny that shifts like a dream that would dissagree. If I were buying one new, I would get either a SHD T-5 (Z-BOX), or a Tremec 3550.

This combo works great. No way to compare it to the old 3 speed/3.00 gears. No way at all, the excelleration is MUCH, MUCH, MUCH better, and I cruise at 70 mph at 2000 rpm.

I think I'm gonna get some 3.80's (Richmond Gear) and an Auburn traction loc though. Sounds like fun to me.

[This message has been edited by 66fastback (edited 07-08-1999).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stupid Question?	SilverGT02	Modular Madness	4	07-06-2002 11:01 AM
Ready for 42 Volt Automotive Systems?	PKRWUD	Windsor Power	7	05-12-2002 11:01 AM
Can't wait to get back	mustangman65_79	Blue Oval Lounge	8	02-24-2002 03:16 PM
anyone heard of les shepperd who sells engines from beech grove IN.	stalker95	Windsor Power	0	11-12-2001 10:56 PM

07-08-1999, 01:59 AM	#1
66fastback Registered Member Join Date: Mar 1999 Location: Dallas, TX Posts: 208	It's got an 8" rear end. I picked up the 3.40's at a track event in Tulsa. I haven't seen anybody selling a set like this either--at least not new. The 5-speed is a T-5 unit from an 1988 Mustang. Any 5 speed from these cars made from 1985 or so to 1994 will work. If you are going to buy one used, look for one from at least 89 or 90 up. These are a little bit stronger than the older one's, but I haven't had any trouble from mine....nearly 100,000 miles and counting. I use Redline MTL synthetic in it, which some of the late model folks think is a no-no. I have a high mileage tranny that shifts like a dream that would dissagree. If I were buying one new, I would get either a SHD T-5 (Z-BOX), or a Tremec 3550. This combo works great. No way to compare it to the old 3 speed/3.00 gears. No way at all, the excelleration is MUCH, MUCH, MUCH better, and I cruise at 70 mph at 2000 rpm. I think I'm gonna get some 3.80's (Richmond Gear) and an Auburn traction loc though. Sounds like fun to me. [This message has been edited by 66fastback (edited 07-08-1999).]