Who out there has 16" or larger rims that don't rub?

Shaggy · 11-14-2000, 10:21 PM

I have a customers car with 17x9 cobra r's with 275/40/17's on it and no rub except for the frame rail on lock to lock turns...I did make a billet spacer for them though so the offset is "perfect" BTW he road races with the spacers on as well so before you cringe on the spacer idea if they are made so the fit over your hub like a rim does and have only the bolt pattern you are running they are plenty strong.

Gear head if you want to FI that big a motor go to Here for the intake that will feed that much motor it will allow you to use all the stock sensors and computer for a baseline and them get the PMS unit from anderson motorsport to have full control off of you injection....I have priced what I want/need for mine with me doing the labor and it comes out to roughly this price for the non common items like injectors, sensors, eec-iv, throttle body and harness(you can use the street rod harness from motorsport or make your own).I am making my own harness and buying the rest from my suppliers (it wouldn't be fair to post those prices)because they are regular items to be found in the back of any mustang mag.

PMS 800
interacq data acquistion software 300
elbow for my existing victor 170

[This message has been edited by Shaggy (edited 11-14-2000).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT rims on v6 stangs?	this is not cbring	Blue Oval Lounge	8	11-02-2002 05:16 PM
got rid of my old rims	silverv6	Blue Oval Lounge	0	04-01-2002 04:49 AM
16" rims	tuco	Windsor Power	1	03-12-2002 06:58 PM
17" Rims?	Phantom5oh	Windsor Power	7	07-03-2001 01:35 PM
BULLITT RIMS	LI STANG	Modular Madness	6	04-03-2001 10:17 AM

11-14-2000, 10:21 PM	#3
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	I have a customers car with 17x9 cobra r's with 275/40/17's on it and no rub except for the frame rail on lock to lock turns...I did make a billet spacer for them though so the offset is "perfect" BTW he road races with the spacers on as well so before you cringe on the spacer idea if they are made so the fit over your hub like a rim does and have only the bolt pattern you are running they are plenty strong. Gear head if you want to FI that big a motor go to Here for the intake that will feed that much motor it will allow you to use all the stock sensors and computer for a baseline and them get the PMS unit from anderson motorsport to have full control off of you injection....I have priced what I want/need for mine with me doing the labor and it comes out to roughly this price for the non common items like injectors, sensors, eec-iv, throttle body and harness(you can use the street rod harness from motorsport or make your own).I am making my own harness and buying the rest from my suppliers (it wouldn't be fair to post those prices)because they are regular items to be found in the back of any mustang mag. PMS 800 interacq data acquistion software 300 elbow for my existing victor 170 [This message has been edited by Shaggy (edited 11-14-2000).]