what to do... 289,302, or 351

Ron1 · 09-07-2001, 01:50 PM

Dan, Just a 302 (R302 block), 347 stroker kit from jds performance in Florida. Eagle H beams, forged crank, Ross domed pistons, Edelbrock Victor jr heads (stage II) and intake that is port matched to the heads. BG 850 carb. Cam is a solid roller. .702/.712 lift at 272/275 dur. @.050. MSD 6 AL, CSI elec w/p, Canton 7 quart pan, Taylor 10.4 mm wires, Jacobs Ultracoil, fuel system is a BG400 that feeds both the nitrous and n/a side thru a Magnaflow and BG 2 port regulator.
The controller I have works on a time base and level base, so if it is jetted for 200 horse, I can dial a 50 horse shot to start in 0.0 seconds (on launch) and go to 100 % over the next 5 seconds, or ask it to go to 75 % in 5 seconds. On a dual shot you can have stage 1 on launch, and using an RPM window switch, or a timer to trigger stage 2. You could plumb the intake for a nozzle at each runner, most intakes have N2O bosses.

Ron

09-07-2001, 01:50 PM	#20
Ron1 Registered Member Join Date: Sep 1999 Location: Vancouver, WA USA Posts: 439	Dan, Just a 302 (R302 block), 347 stroker kit from jds performance in Florida. Eagle H beams, forged crank, Ross domed pistons, Edelbrock Victor jr heads (stage II) and intake that is port matched to the heads. BG 850 carb. Cam is a solid roller. .702/.712 lift at 272/275 dur. @.050. MSD 6 AL, CSI elec w/p, Canton 7 quart pan, Taylor 10.4 mm wires, Jacobs Ultracoil, fuel system is a BG400 that feeds both the nitrous and n/a side thru a Magnaflow and BG 2 port regulator. The controller I have works on a time base and level base, so if it is jetted for 200 horse, I can dial a 50 horse shot to start in 0.0 seconds (on launch) and go to 100 % over the next 5 seconds, or ask it to go to 75 % in 5 seconds. On a dual shot you can have stage 1 on launch, and using an RPM window switch, or a timer to trigger stage 2. You could plumb the intake for a nozzle at each runner, most intakes have N2O bosses. Ron