Too much money spent to be going so slow!

Skyman · 02-14-2001, 02:57 PM

You really can't tell what you have untill you get to the track and get your MPH. What compression ratio do you have? Also I think a dual plane manifold is not good for your setup. You should run at RPM intake. The TFS heads flow good up top. The 272/484 lift cam sounds kinda small. I have the E-303 and its 282/.498 and I'm only running a 302. If the holley 600cfm carb isnt tuned its killing you too.

Also you need to work on your ignition system if you havn't. And your timing and timing advance. Find out what those are at and post them. Pull your crank fan and put in an electric if you already havn't. Also do you still have points?

And those 2.73 gears are MURDERING YOU.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
351w is slow and weak...please help	ka_dawg98	Windsor Power	8	10-07-2003 10:50 AM
Slow Stang	PeTr0	Windsor Power	15	08-09-2003 11:51 PM
But its not about the money....	Hammer	Blue Oval Lounge	12	08-30-2002 12:59 PM
Best money I have spent!!!	Stang_Crazy	Windsor Power	19	04-30-2002 02:23 PM
wow i finally have some money for mods	RAGE_5.0	Blue Oval Lounge	5	10-25-2001 09:13 PM

02-14-2001, 02:57 PM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	You really can't tell what you have untill you get to the track and get your MPH. What compression ratio do you have? Also I think a dual plane manifold is not good for your setup. You should run at RPM intake. The TFS heads flow good up top. The 272/484 lift cam sounds kinda small. I have the E-303 and its 282/.498 and I'm only running a 302. If the holley 600cfm carb isnt tuned its killing you too. Also you need to work on your ignition system if you havn't. And your timing and timing advance. Find out what those are at and post them. Pull your crank fan and put in an electric if you already havn't. Also do you still have points? And those 2.73 gears are MURDERING YOU. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns. 13.2@106mph Daily Driver STOCK-1994 Integra LS 15.48@91mph