E.T. guess???

jays306LX · 06-04-2001, 04:56 PM

now i will agree with saleen on this as far as weight.. i have a 84 coupe and on the door it reads 2867.. now given this was a 4 banger.. i am not sure what it will weigh with my mods plus it has no tank but a 16 gallon rci cell... no back seat two kirky alum seats.. all deading material is gone all wires that used to exsist are gone just the ones need to run and have lights are left.. I also agree with the other on knowing what your other plans on for the motor all stock rebuild whats the compression nitro? what u gonna do?? that would help greatly.. i have no room to talk i am hoping for mid to high 11s with my combo but i know i will probably see mid 12s

------------------
84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hummm.....guess Civic's can't turn either	tireburner163	Stang Stories	1	06-11-2003 11:16 PM
Guess what happened at.....	mike_navigator	Blue Oval Lounge	13	12-16-2001 12:55 AM
Finally Dyno'd my car! Anyone want to guess?	Stangrrr	Stang Stories	23	10-30-2001 07:26 PM
Who will be in the front (guess guy's) ????!!	HAITHAM	Windsor Power	3	05-06-2001 08:45 AM
What's your best guess???	Kevin Price	Blue Oval Lounge	51	01-30-2001 10:27 PM

06-04-2001, 04:56 PM	#1
jays306LX Registered Member Join Date: Jul 2000 Location: knoxville,tenn,usa Posts: 163	now i will agree with saleen on this as far as weight.. i have a 84 coupe and on the door it reads 2867.. now given this was a 4 banger.. i am not sure what it will weigh with my mods plus it has no tank but a 16 gallon rci cell... no back seat two kirky alum seats.. all deading material is gone all wires that used to exsist are gone just the ones need to run and have lights are left.. I also agree with the other on knowing what your other plans on for the motor all stock rebuild whats the compression nitro? what u gonna do?? that would help greatly.. i have no room to talk i am hoping for mid to high 11s with my combo but i know i will probably see mid 12s ------------------ 84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's