Another day at the track

07-24-2001, 04:52 PM

Sky, I've got the TFS track heat (even though everyone said the runners would be too long and I'd lose low end torque - I didn't see it - but I do see, along w/ my e cam ALOT of mid-high end torque). All I had to do w/ the intake to head was to "slightly" gasket match it with fel-pros.... not even worth the extra cash to port them out. With your TFS heads to intake - you won't even have to do that. I've still got my crappy stock rocker arms, so I'm obviously not getting everything out of my cam yet (that's pat of my 12/01 mods). Plugs are gapped to the MSD 6AL specifications. We played w/ fp and found that 39 psi worked best w/ what I've got. Chris Johnson at JMS is great.....he tuned the chip to my exact specs - and at a great price ($300) - only other time he'll have to reburn my program is when I add some "juice". Before my chip went in, with all my other mods, the car ran good, but the idle surged like hell. It would stall out after 3 minutes at idle. Since it went in, I ran it for 30 minutes at idle with all the accessories on, then got bored so I turned it off (the temp never got past the M in NORMAL!

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts);
30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Famoso private track day for So cal!	46stang	Blue Oval Lounge	1	10-06-2004 12:33 AM
Track conditions	Eric4Nitrous	Windsor Power	12	11-22-2002 10:59 PM
Rough day at the track	bigwhitecobra	Blue Oval Lounge	10	11-08-2001 12:27 AM
Mustang Club of Central Iowa Autocross - May 6 - Marshalltown Go-Kart Track	KB1991	Ford Show & Go	0	05-03-2001 12:33 PM
Mustang Club of Central Iowa Autocross - May 6 - Marshalltown Go-Kart Track	KB1991	Corner Carvers Delight	0	05-03-2001 12:32 PM

07-24-2001, 04:52 PM	#1
bada$$lx Guest Posts: n/a	Sky, I've got the TFS track heat (even though everyone said the runners would be too long and I'd lose low end torque - I didn't see it - but I do see, along w/ my e cam ALOT of mid-high end torque). All I had to do w/ the intake to head was to "slightly" gasket match it with fel-pros.... not even worth the extra cash to port them out. With your TFS heads to intake - you won't even have to do that. I've still got my crappy stock rocker arms, so I'm obviously not getting everything out of my cam yet (that's pat of my 12/01 mods). Plugs are gapped to the MSD 6AL specifications. We played w/ fp and found that 39 psi worked best w/ what I've got. Chris Johnson at JMS is great.....he tuned the chip to my exact specs - and at a great price ($300) - only other time he'll have to reburn my program is when I add some "juice". Before my chip went in, with all my other mods, the car ran good, but the idle surged like hell. It would stall out after 3 minutes at idle. Since it went in, I ran it for 30 minutes at idle with all the accessories on, then got bored so I turned it off (the temp never got past the M in NORMAL! ------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)