low 13's

Killercanary · 02-21-2001, 11:27 PM

1. Get a set of Nitto drag radials
2. Underdrive pulleys
3. Homemade air inlet tube

With these you will be at or better than 13.8's at 99+mph. In my 95GT convertible, I was running 15.2's at 90mph stock. 3.73's, HD clutch, off road X pipe, 2 chamber flowmasters, and advanced timing took me to a 14.9 at 91.5mph. Underdrive pulleys took me to 14.5-14.6 at 94.8mph. Edelbrock intake, 65mm T-body, alum. DS, and shorty headers took me to 14.3's at 96.5mph with 2.09-2.1 60's on street tires. Now with the Nitto's and homemade inlet tube I run consistent 13.8's at 98mph+, my 60's are now 1.91-1.92. The homemade inlet tube resulted in 1mph and 1 tenth in both mine and my cousin's 94GT, since you are getting the cold air put on that may work the same. Bump your timing up a little too, try 12 and work up from there, I run 13*. Remove your spare, jack, etc. And make sure you get to the track really early, like an hour before it opens so your car will be cold. The 94-95 computers, especially the cobra comp. hate warm engine temps- I see as much as 2 tenths variance in hot lapping my car! Good luck, any more question feel free to email me.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

02-21-2001, 11:27 PM	#10
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	1. Get a set of Nitto drag radials 2. Underdrive pulleys 3. Homemade air inlet tube With these you will be at or better than 13.8's at 99+mph. In my 95GT convertible, I was running 15.2's at 90mph stock. 3.73's, HD clutch, off road X pipe, 2 chamber flowmasters, and advanced timing took me to a 14.9 at 91.5mph. Underdrive pulleys took me to 14.5-14.6 at 94.8mph. Edelbrock intake, 65mm T-body, alum. DS, and shorty headers took me to 14.3's at 96.5mph with 2.09-2.1 60's on street tires. Now with the Nitto's and homemade inlet tube I run consistent 13.8's at 98mph+, my 60's are now 1.91-1.92. The homemade inlet tube resulted in 1mph and 1 tenth in both mine and my cousin's 94GT, since you are getting the cold air put on that may work the same. Bump your timing up a little too, try 12 and work up from there, I run 13*. Remove your spare, jack, etc. And make sure you get to the track really early, like an hour before it opens so your car will be cold. The 94-95 computers, especially the cobra comp. hate warm engine temps- I see as much as 2 tenths variance in hot lapping my car! Good luck, any more question feel free to email me. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire