explorer intake here, a few Q's on install

fiveohpatrol · 02-26-2001, 06:03 PM

chris, i've got the upper off now and was comparing the two, theres a couple of hose connections that im confused about, theres one towards the back on the stock one that comes out and then theres two vacuum lines that connect to it and the explorer has no vacuum line connections whatsoever, what do i do with them? one goes to the FPR, also theres two (brass?) connections one towards the front and one towards the rear underneath the upper manifold that i dont know what goes there, the rear one is in the same place as the stocker and leads to the PCV valve, speaking of which theres no place on the lower mainfold for the PCV valve, is it not needed on this intake? i want to know what the connections are and where they lead before i put it together wrong, anyone have a picture of the underside of the upper manifold they could post? i'd really appreciate it, thanks

------------------
88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
explorer intake and mass air?	canukracer	Windsor Power	1	07-30-2003 07:56 PM
trickflow intake install	StripedStangLX	Windsor Power	7	03-12-2002 02:01 PM
Explorer intake install	leo	Windsor Power	0	03-26-2001 04:06 PM
Explorer intake install	leo	Windsor Power	3	02-27-2001 09:41 PM
explorer intake???	joey50gt	Windsor Power	5	02-25-2001 10:20 PM

02-26-2001, 06:03 PM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	chris, i've got the upper off now and was comparing the two, theres a couple of hose connections that im confused about, theres one towards the back on the stock one that comes out and then theres two vacuum lines that connect to it and the explorer has no vacuum line connections whatsoever, what do i do with them? one goes to the FPR, also theres two (brass?) connections one towards the front and one towards the rear underneath the upper manifold that i dont know what goes there, the rear one is in the same place as the stocker and leads to the PCV valve, speaking of which theres no place on the lower mainfold for the PCV valve, is it not needed on this intake? i want to know what the connections are and where they lead before i put it together wrong, anyone have a picture of the underside of the upper manifold they could post? i'd really appreciate it, thanks ------------------ 88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install