New Thrust Rims

RonJohn · 03-01-2001, 11:16 AM

Check out the new thrust rims off the '01 GT.

------------------
93GT, K, 3.73 gears, Flowmasters, FMS headers, Bassani X-pipe, King Cobra Clutch, Cobra 4-disc brakes.

Smokedawg · 03-01-2001, 11:22 AM

Thats bad-@ss..Looks great man.

------------------
347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

fiveohpatrol · 03-01-2001, 11:36 AM

those look ******* awesome on there, where'd you find them? i havent seen them in any ad, did you go through ford?

------------------
88 Notchback 5.0, 3.73's, Explorer intake, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rocker and intake install

RonJohn · 03-01-2001, 11:39 AM

I found them online from Gene Evans Ford, then I went to a local dealership and saw them up close. They remind me of the "daisy" or "petal" rims from late 60's. I really like the cobra "R" rims, but I wanted a different look.

Stang_Crazy · 03-01-2001, 02:11 PM

They look really good. Hmm, wonder how they would look on my car??? I like them better than the R's too. It's different but good. Shops and distrubutors better stock up on these because I think they are going to be REAL popular.

------------------
91 GT AOD: 3.73's, Pulleys,PI Converter, 14.71@91.78mph
2.11 60'(before pulleys)

03-01-2001, 11:16 AM	#1
RonJohn Registered Member Join Date: Feb 1999 Location: Coconut Creek, FL, USA Posts: 49	New Thrust Rims Check out the new thrust rims off the '01 GT. ------------------ 93GT, K, 3.73 gears, Flowmasters, FMS headers, Bassani X-pipe, King Cobra Clutch, Cobra 4-disc brakes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT rims on v6 stangs?	this is not cbring	Blue Oval Lounge	8	11-02-2002 05:16 PM
got rid of my old rims	silverv6	Blue Oval Lounge	0	04-01-2002 04:49 AM
17" Rims?	Phantom5oh	Windsor Power	7	07-03-2001 01:35 PM
BULLITT RIMS	LI STANG	Modular Madness	6	04-03-2001 10:17 AM
To red gt with ford '01 thrust style rims	85cobra	Windsor Power	0	03-22-2001 01:29 AM

03-01-2001, 11:22 AM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Thats bad-@ss..Looks great man. ------------------ 347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

03-01-2001, 11:36 AM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	those look ******* awesome on there, where'd you find them? i havent seen them in any ad, did you go through ford? ------------------ 88 Notchback 5.0, 3.73's, Explorer intake, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rocker and intake install

03-01-2001, 11:39 AM	#4
RonJohn Registered Member Join Date: Feb 1999 Location: Coconut Creek, FL, USA Posts: 49	I found them online from Gene Evans Ford, then I went to a local dealership and saw them up close. They remind me of the "daisy" or "petal" rims from late 60's. I really like the cobra "R" rims, but I wanted a different look.

03-01-2001, 02:11 PM	#5
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	They look really good. Hmm, wonder how they would look on my car??? I like them better than the R's too. It's different but good. Shops and distrubutors better stock up on these because I think they are going to be REAL popular. ------------------ 91 GT AOD: 3.73's, Pulleys,PI Converter, 14.71@91.78mph 2.11 60'(before pulleys)