junk the 4.6

EXAM1999 · 07-25-2000, 10:48 PM

Put a converter on & a blower and your car will feel much better. There is a guy online, Spence(Vicki's car) that has a 96 GT auto that runs 11.70s @ over 116 mph with bolt-ons, SVO heads & a Vortech. I think the 4.10s are hurting you because the car probably shifts into O/D before the line. 3.73s with a good loose converter would be a much better combo. Save for ported 99 GT heads & a blower and that car will fly. I have no complaints about my 99 GT auto except if I stamp it to the floor from a 20 mph roll, I spin for 2 gears with 285/40 Nittos in the rear.

------------------
99 Silver GT
4R70W, Borla Cat Back,
SHM Slotted Rotors, custom 10.5" ProTorque 3200 stall converter, Transgo Shift kit, Redline Synthetic ATF, Cooler, Bassani X-Pipe, Vortech V2 S-trim, 3.73 gears, 70 mm T/B, Mac Adj. uppers & lowers, ROH ZR6 17X9.5 & 17X8.5 with Nittos, BBK(Walbro) 255 pump & FMS Shorty Headers, D&D Tubular K-member, Coil-overs, A-arms, MM CC plates. Currently running 3.33 pulley at 12-13 psi with AFM powerpipe. Longtubes, Cat-H-pipe, Ported stock heads & SVO Intake are next.
Dyno 7/15/00
358 rwhp @ 5600 rpms
386 rwtq @ 3600 rpms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TYPHOON intake???? junk	drtbiker	Windsor Power	5	10-15-2002 01:32 PM
granatelli lower control arms are junk!	sn95gt19	Windsor Power	9	07-02-2002 09:37 AM
junk yard find	mustangman65_79	Blue Oval Lounge	0	03-25-2002 04:58 AM
75m bullet junk??	v8power5	Windsor Power	2	03-21-2001 05:54 PM
Cinncinatti COMPOSITES HOODS ARE JUNK!!!!	Patrick Boetticher	Windsor Power	2	01-23-2001 09:55 AM

07-25-2000, 10:48 PM	#4
EXAM1999 Registered Member Join Date: Mar 1999 Location: Oakdale, NY, US Posts: 50	Put a converter on & a blower and your car will feel much better. There is a guy online, Spence(Vicki's car) that has a 96 GT auto that runs 11.70s @ over 116 mph with bolt-ons, SVO heads & a Vortech. I think the 4.10s are hurting you because the car probably shifts into O/D before the line. 3.73s with a good loose converter would be a much better combo. Save for ported 99 GT heads & a blower and that car will fly. I have no complaints about my 99 GT auto except if I stamp it to the floor from a 20 mph roll, I spin for 2 gears with 285/40 Nittos in the rear. ------------------ 99 Silver GT 4R70W, Borla Cat Back, SHM Slotted Rotors, custom 10.5" ProTorque 3200 stall converter, Transgo Shift kit, Redline Synthetic ATF, Cooler, Bassani X-Pipe, Vortech V2 S-trim, 3.73 gears, 70 mm T/B, Mac Adj. uppers & lowers, ROH ZR6 17X9.5 & 17X8.5 with Nittos, BBK(Walbro) 255 pump & FMS Shorty Headers, D&D Tubular K-member, Coil-overs, A-arms, MM CC plates. Currently running 3.33 pulley at 12-13 psi with AFM powerpipe. Longtubes, Cat-H-pipe, Ported stock heads & SVO Intake are next. Dyno 7/15/00 358 rwhp @ 5600 rpms 386 rwtq @ 3600 rpms