99gt heads for a 98gt

SMOKE · 09-01-2000, 08:21 AM

Part Number Description Price Quantity P*Q
XL3Z-6049-HA head 273.00 1 $273.00
XL3Z-6049-GA head 273.00 1 $273.00
XR3Z-9424-DA intake 182.00 1 $182.00
XL3Z-6582-AA valve cover 53.00 1 $53.00
XL3Z-6582-CA valve cover 59.00 1 $59.00
XL3Z-9439-AA intake gasket set 5.00 1 $5.00
XR3Z-6051-BA head gasket 20.00 1 $20.00
XL3Z-6051-BA head gasket 20.00 1 $20.00
F5AZ-6065-A head bolts 2.50 20 $50.00
F8AZ-9448-AA LH exhaust gasket 4.50 2 $9.00
F81Z-9448-AA RH exhaust gasket 11.00 1 $11.00
BE ADVISED, YOU MAY NEED TO OBTAIN A 99 SPEC WATER PUMP TO USE THE NEW STYLE HEATER HOSE! IF YOU CANNOT DO THAT, A LENGTH OF STANDARD RUBBER HEATER HOSE WILL WORK. Im running the rubber hose on my car and it has a kink in it near the waterpump, Im not to comfortable with kinks in my cooling lines.

Also, a new oil pan and timing cover gaskets are not mandatory, but reccomended.

This part was on the old list ----N806300-S2 new front cover studs 1.82 8 $14.56-----IT IS INCORRECT!!! Fords parts computer system continues to mistakely list these 8mm bolts for the 99-00GT. I had to do a parts check for a 99 F150 5.4L truck to obtain the correst stud #'s. I appologize for any inconvinience Ford has caused us. You should be able to swap your parts with Ford even if they are opened due to their fugg up.

You will need the following new front cover studs and bolts. You will need 6 studs p/n N808142-S309, about $2.00@, you will also need 2 bolts p/n N808140-S309

found this on the corral .... Search for "99 HEADS" or by name "PAUL99GT".
SMOKE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
val springs in stock 97 heads , quesion ?	southernstang97	Modular Madness	0	07-16-2002 11:52 AM
My NEW replacement Holley heads are different!	Rick 91GT	Windsor Power	8	04-23-2001 06:45 AM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM

09-01-2000, 08:21 AM	#3
SMOKE Old School ROUSH Join Date: Nov 1999 Location: Stockbridge, GA Posts: 531	Part Number Description Price Quantity PQ XL3Z-6049-HA head 273.00 1 $273.00 XL3Z-6049-GA head 273.00 1 $273.00 XR3Z-9424-DA intake 182.00 1 $182.00 XL3Z-6582-AA valve cover 53.00 1 $53.00 XL3Z-6582-CA valve cover 59.00 1 $59.00 XL3Z-9439-AA intake gasket set 5.00 1 $5.00 XR3Z-6051-BA head gasket 20.00 1 $20.00 XL3Z-6051-BA head gasket 20.00 1 $20.00 F5AZ-6065-A head bolts 2.50 20 $50.00 F8AZ-9448-AA LH exhaust gasket 4.50 2 $9.00 F81Z-9448-AA RH exhaust gasket 11.00 1 $11.00 BE ADVISED, YOU MAY NEED TO OBTAIN A 99 SPEC WATER PUMP TO USE THE NEW STYLE HEATER HOSE! IF YOU CANNOT DO THAT, A LENGTH OF STANDARD RUBBER HEATER HOSE WILL WORK. Im running the rubber hose on my car and it has a kink in it near the waterpump, Im not to comfortable with kinks in my cooling lines. Also, a new oil pan and timing cover gaskets are not mandatory, but reccomended. This part was on the old list ----N806300-S2 new front cover studs 1.82 8 $14.56-----IT IS INCORRECT!!! Fords parts computer system continues to mistakely list these 8mm bolts for the 99-00GT. I had to do a parts check for a 99 F150 5.4L truck to obtain the correst stud #'s. I appologize for any inconvinience Ford has caused us. You should be able to swap your parts with Ford even if they are opened due to their fugg up. You will need the following new front cover studs and bolts. You will need 6 studs p/n N808142-S309, about $2.00@, you will also need 2 bolts p/n N808140-S309 found this on the corral .... Search for "99 HEADS" or by name "PAUL99GT". SMOKE*