Pics of Automatic 99 Cobra + Tubular front end!

beefcake · 05-07-2001, 09:52 PM

Smoke, it is not just a drag car, it's the car i drive 30 minutes to work each day. But, considering I am going to have about 600rwhp with the xtra loss at the wheels from the automatic, the tremec wasn't no where near capable of handling the power.

I do race NMRA and am planning on doing some fun ford and want to be consistent as possible.

Here is a complete list of all my mods.

Performance Mods:
Lidio Tuned, Speed Pro Controlled, Forged 4.6 w/Manley Rods & JE Pistons, Ported Stock Heads, Custom Long Tubes, Custom X Pipe, Custom 3” Exhaust, 97 Tank, Export Filler Neck, Cartech Pickup, Bosch External Pump, Kenne Belle Boost A Pump, #8 Feed Lines, 99 Fuel Rails Converted to Return Style, 55lb/hr Injectors, Cartech Regulator, #6 Return Lines, MSD DIS-4 Ignition, Autologic Computer Chip, Vortech SC Trim w/Impeller Upgrade to S trim, 2.87” Pulley, SHM/Alternative Auto Custom 8 Rib Pulleys, SHM Air to Air Intercooler, Anderson Ford Power Pipe, K&N Air Filter, 92' GT Housing w/31 Spline Superior Axles, Racing Wheel Studs, FMS 4.30’s, Detroit Locker, FMS Aluminum Drive Shaft, Drive Shaft Loop, Bullet Proof Ford 4R70W Overdrive Transmission w/ Stallion Locking Torque Converter & Baumann Engineering Baumannator TCS(Transmission Control System), KB Oil Pan, KB Windage Tray, KB Sub Frame Connectors, Ground Pounder Coil Overs, Ground Pounder A Arms, Ground Pounder Tubular K, Tokico 5-Way Adjustable Drag Struts, Moroso Rear Trick Drag Springs, Pinion Snubber, Ground Pounder Upper Control Arms, South Side Lower Control Arms, Maximum Motorsports 6 Point Roll Bar w/Swing Outs, Autometer Phantom Boost & Fuel Pressure Gauges, MSD Shift Light

Appearance Mods:
Forgeline RS Wheels 17x11 Rear with 315's and 17x9 1/2 Front with 275's, Weld Draglites for the Strip w/skinnies and M/T ET Drag 28”, Steeda Cobra R Hood, Steeda Rear Wing, Saleen Side Scoops, 5 Point Harness, Corbeau Targa RS Seats, Mark Lutton Rear Seat Delete Kit, Tinted Windows, MGW LTD Headlight Knob, Door Pins, Cigarette Lighter, E-Brake Handle, AC Knobs, Cobra Grill Emblem, Steeda Pedal Covers

And here is a pic of what the car looks like from the outside.
http://www.fordcobra.cc/vobrahq7.jpg

BTW, Used Seats?

Those seats are brand new Corbeau Targa RS's.
This is what they look like.
http://www.fordcobra.cc/targa.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
automatic Cobra?	93SVTstang	Stang Stories	24	04-14-2009 11:38 AM
What's the Difference between 95 GT and 95 Cobra	Ron Brooks	Windsor Power	14	05-25-2005 04:43 PM
Cobra R's 17*9 on front, will they rub???	88COBRA	Windsor Power	1	07-19-2001 08:06 AM
Cobra Computer	Bangin Gears	Windsor Power	1	04-30-2001 02:38 AM
93 Cobra Front Rotors	RMARIANI	Windsor Power	2	04-14-2001 01:19 PM

05-07-2001, 09:52 PM	#5
beefcake Registered Member Join Date: May 2000 Location: cinti Posts: 62	Smoke, it is not just a drag car, it's the car i drive 30 minutes to work each day. But, considering I am going to have about 600rwhp with the xtra loss at the wheels from the automatic, the tremec wasn't no where near capable of handling the power. I do race NMRA and am planning on doing some fun ford and want to be consistent as possible. Here is a complete list of all my mods. Performance Mods: Lidio Tuned, Speed Pro Controlled, Forged 4.6 w/Manley Rods & JE Pistons, Ported Stock Heads, Custom Long Tubes, Custom X Pipe, Custom 3” Exhaust, 97 Tank, Export Filler Neck, Cartech Pickup, Bosch External Pump, Kenne Belle Boost A Pump, #8 Feed Lines, 99 Fuel Rails Converted to Return Style, 55lb/hr Injectors, Cartech Regulator, #6 Return Lines, MSD DIS-4 Ignition, Autologic Computer Chip, Vortech SC Trim w/Impeller Upgrade to S trim, 2.87” Pulley, SHM/Alternative Auto Custom 8 Rib Pulleys, SHM Air to Air Intercooler, Anderson Ford Power Pipe, K&N Air Filter, 92' GT Housing w/31 Spline Superior Axles, Racing Wheel Studs, FMS 4.30’s, Detroit Locker, FMS Aluminum Drive Shaft, Drive Shaft Loop, Bullet Proof Ford 4R70W Overdrive Transmission w/ Stallion Locking Torque Converter & Baumann Engineering Baumannator TCS(Transmission Control System), KB Oil Pan, KB Windage Tray, KB Sub Frame Connectors, Ground Pounder Coil Overs, Ground Pounder A Arms, Ground Pounder Tubular K, Tokico 5-Way Adjustable Drag Struts, Moroso Rear Trick Drag Springs, Pinion Snubber, Ground Pounder Upper Control Arms, South Side Lower Control Arms, Maximum Motorsports 6 Point Roll Bar w/Swing Outs, Autometer Phantom Boost & Fuel Pressure Gauges, MSD Shift Light Appearance Mods: Forgeline RS Wheels 17x11 Rear with 315's and 17x9 1/2 Front with 275's, Weld Draglites for the Strip w/skinnies and M/T ET Drag 28”, Steeda Cobra R Hood, Steeda Rear Wing, Saleen Side Scoops, 5 Point Harness, Corbeau Targa RS Seats, Mark Lutton Rear Seat Delete Kit, Tinted Windows, MGW LTD Headlight Knob, Door Pins, Cigarette Lighter, E-Brake Handle, AC Knobs, Cobra Grill Emblem, Steeda Pedal Covers And here is a pic of what the car looks like from the outside. http://www.fordcobra.cc/vobrahq7.jpg BTW, Used Seats? Those seats are brand new Corbeau Targa RS's. This is what they look like. http://www.fordcobra.cc/targa.jpg