Clunk Clunk

01 BLACK GT · 07-07-2001, 08:37 AM

Well I took it to my friends shop. we looked at it for maybe 2 hours. we tightened every bolt but they were all tight. then we were talking and I had my hands on the front sway bar and was kinda rocking the car when I heard the noise. There were 6 bolts we didn't check. 3 Trans cross menmber bolts were about 1-2 turns out. That was nothing. When I checked the trans mount bolts, They wer 2 turns from falling out!!!!!!!!!!!So we took them the rest of the way out and put some loctite on them. Drove it and guess what.....NO NOISE!!!!!!!So we checked every bolt again with a fine tooth comb just to make sure there was nothin' else.
Later

------------------
01' Black GT
2 chamber Flows Mach 460, Leather 17"thrust wheels, bassanni x-pipe with cats, BBK Cold Air, Steeda pullies and timing adjuster @ 13*, Steeda Satin Shift Knob
Tri-ax shifter A pillar Double gauge pod, Auto meter White Phantom Gauges Fuel Pressure and Vac, Richmond 3:73's
Steeda Subframe Connectors.Strut Tower Brace
13.41 @ 102.1mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clunk & Steering Play	Dave & Cindy	Classic Mustangs	3	09-11-2002 08:21 AM
slight clunk sound in rear	crazy5.0	Windsor Power	3	02-24-2002 10:09 PM
Tranny Clunk	Texas89GT	Modular Madness	5	10-09-2001 02:22 PM

07-07-2001, 08:37 AM	#8
01 BLACK GT Registered Member Join Date: Apr 2001 Location: Baltimore, Md Posts: 35	Well I took it to my friends shop. we looked at it for maybe 2 hours. we tightened every bolt but they were all tight. then we were talking and I had my hands on the front sway bar and was kinda rocking the car when I heard the noise. There were 6 bolts we didn't check. 3 Trans cross menmber bolts were about 1-2 turns out. That was nothing. When I checked the trans mount bolts, They wer 2 turns from falling out!!!!!!!!!!!So we took them the rest of the way out and put some loctite on them. Drove it and guess what.....NO NOISE!!!!!!!So we checked every bolt again with a fine tooth comb just to make sure there was nothin' else. Later ------------------ 01' Black GT 2 chamber Flows Mach 460, Leather 17"thrust wheels, bassanni x-pipe with cats, BBK Cold Air, Steeda pullies and timing adjuster @ 13*, Steeda Satin Shift Knob Tri-ax shifter A pillar Double gauge pod, Auto meter White Phantom Gauges Fuel Pressure and Vac, Richmond 3:73's Steeda Subframe Connectors.Strut Tower Brace 13.41 @ 102.1mph