How to remove body trim......

[gasman517]

Hi
the trim is held on with two sided tape, just start prying one corner and pull slowly the trim will come off easy, but it will curl up because there are two metal strips in the tape.you have to remove the strips by using a propane torch, carfully heat the top edge of the strip lift it with a screw driver. when you have the edge up grip it with a vise grip then slowly heat the strip and pull it off.carefull dont get the trim to hot it will melt the edges easly.
To replace use some 3/4" 3m trim tape(good stuff) thats it. oh ya the two moldings just behind the bumper cover are held on with nuts .

-----------------------------------------
89 lx edelbrock heads e303 holly intake 150 nitrous 11.36@122

------------------