

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
![]() Yes, slam the caster plates as far back as they go towards the firewall.
Camber may be adjusted with a bubble gauge. You can get a simple 2 foot carpenter's level. Drill/tap two screws 17" apart (for a 17" wheel). These two points will rest on the wheel, and yet clear the tires. Now you adjust the ONE screw to a desired height (so on a vertical plane, it is like 87 degrees when you place it against the wall). Using trigonometry you can calculate the Tan=Sin/Cos of the angle and get the height to adjust the screw... Then simply make the bubble balance right in the middle, and you have "x" degrees of camber. Seen it done, yet to do it myself. I take mine to an "old fashioned" garage (no computers) and have them do it for me, with me in the pit alongside them giving them the specs as WE align it together. ------------------ Darius Rudis Roadracer: Home built t-arm/panhard suspension powered by an S-trimmed motor :-) My Mustang Page |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help woth installing groundpounder coilovers with BBK caster camber plates | ciara | Windsor Power | 0 | 01-10-2004 01:08 PM |
caster and camber? | 79PaceReplica? | Windsor Power | 6 | 08-19-2002 01:04 PM |
Steeda vs MM Caster Camber Plates | Mustangbelle306 | Corner Carvers Delight | 4 | 02-25-2002 05:47 PM |
do i need camber caster plates | chatcher | Windsor Power | 5 | 11-04-2001 01:01 PM |
CAMBER AND CASTER SPECS FOR LIGHT AUTO X? | LOCASH | Corner Carvers Delight | 2 | 01-06-2001 09:48 PM |