© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-12-2001, 02:23 PM | #1 |
Registered Member
Join Date: Jan 2001
Location: Minnesota
Posts: 177
|
T5-Z
Hey all. I would like some opinions on the T5-Z. With my mods I am hoping to have at least 320 HP. If I installed my SSM liftbars, and got some BFG drag radials would the T5-Z be able to handle it for years to come? I plan on getting 4:10's also. Thanks
------------------ 87 GT, BBK shorty's, offroad H-pipe, ASP pullies, 70mm T.B., Cobra intake, no smog pump, Windsor Jr irons, Comp cams 1.6 rollers, F303 cam, H.D. export W.P., Tri-Ax, FMS subframes, Battle boxes, SSM liftbars, FMS King Cobra clutch, mass-air conversion, 73mm C&L, 24lb injectors, BBK fuel pressure regulator, 3/8" no EGR spacer, and other piddly sh*t. |
03-12-2001, 04:07 PM | #2 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
Why did you choose the F-303? It's generally used as a blower cam, although some people have used it N/A and had good luck, the combo I've seen that seems to work well are the GT-40X aluminum heads along with a bigger intake than the Cobra.
Anyway, yeah, I'd say you should make somewhere in the area of 320hp, but I'm not that sure on the Windsor Jr's real performance capacity? The T5z is rated for 330lb/ft of torque, you may be making a little more than that, but I see no reason it won't take it. I've got one from D&D performance, I love it and no problems. Course I'm stock too. |
03-12-2001, 04:23 PM | #3 |
Registered Member
Join Date: Oct 1998
Location: Suburban Chicago, Hanover Park
Posts: 695
|
I'm not hitting your type of power, yet , but I wish I had gone with the TKO instead. The T5Z has been good, but I'm not happy with the first gear ratio compared to the stock T5 and for only a few hundred more I should have gone with the bigger, beefier tremec or TKO. Now I'm looking at the six speed conversion I read about in 5.0 M&SF a couple months ago. :P Maybe in a few years...
|
03-12-2001, 04:50 PM | #4 |
Registered Member
Join Date: Jan 2001
Location: Minnesota
Posts: 177
|
Unit- Damn...I have read a ton of your posts and have never noticed you are from MN. That's exactly why I choose the Fcam, in case I get a supercharger. I have a set of Windsor Sr's that I would throw on there also....so it wouldn't be too bad if infact I was to go supercharged...just a head swap. I havn't had her on the street yet, but that engine is extremely smooth at high RPM's, I am hoping it will have good power all the way up to red line.
------------------ 87 GT, BBK shorty's, offroad H-pipe, ASP pullies, 70mm T.B., Cobra intake, no smog pump, Windsor Jr irons, Comp cams 1.6 rollers, F303 cam, H.D. export W.P., Tri-Ax, FMS subframes, Battle boxes, SSM liftbars, FMS King Cobra clutch, mass-air conversion, 73mm C&L, 24lb injectors, BBK fuel pressure regulator, 3/8" no EGR spacer, and other piddly sh*t. |
03-12-2001, 06:31 PM | #5 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
The cam will support good power to redline, I don't think you'll have any problems pulling up top.
Yeah there are a bunch of cool members here from MN, I'm probably one of the few that tackles winter in my 5.0. I'll agree with the 2.95:1 first gear ratio being steep in the T-5z, but even with my 2.73's my car pulls pretty strong out of the hole. I've definately noticed a slower initial take off, but I also have less wheelspin issues. I would personally like a taller 1st gear if I had some lower gears. With 3.73's I would honestly believe the 2.95 first gear would be an advantage over the 3.35 standard. ------------------ 1987 GT 5spd. D&D Performance "Z" spec T-5 Dynomax 2.5" Super Turbo system BBK 2 1/2" H-pipe with cats [This message has been edited by Unit 5302 (edited 03-12-2001).] |
03-12-2001, 06:52 PM | #6 |
Registered Member
Join Date: Jan 2001
Location: Minnesota
Posts: 177
|
I have read a lot of posts that mention the TKO, who makes it, and how much $ is it?? I was going with the T-5Z since it bolts right up to the stock bellhousing, and no driveshaft mods are needed...and since it's just over a grand. I would like to learn more about the TKO. thanks
------------------ 87 GT, BBK shorty's, offroad H-pipe, ASP pullies, 70mm T.B., Cobra intake, no smog pump, Windsor Jr irons, Comp cams 1.6 rollers, F303 cam, H.D. export W.P., Tri-Ax, FMS subframes, Battle boxes, SSM liftbars, FMS King Cobra clutch, mass-air conversion, 73mm C&L, 24lb injectors, BBK fuel pressure regulator, 3/8" no EGR spacer, and other piddly sh*t. |
|
|