MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-14-2001, 10:33 AM   #2
bosco
Registered Member
 
Join Date: Nov 2001
Location: austin TX
Posts: 115
Default

i have 3.73 and i got a 21 tooth, i got mine from steeda, dont ask why, i found plenty of cheeper ones, i think it was red if that makes a difference, on your transmission, there is a cable that runs from the driverside, near the shifter i think through the firewall to the spedo,you can pop the hood and follow it down to the correct one, this is the only cable i have going to my tranny since i took out all the computers in my car and converted to a carb, but i want to say its the closest one to the driveshaft end of the transmission, if that makes any sence, but like i said you can follow the cable,, all you have to do is pop out that little harness and swap the gear, esy as that, you might have a little trouble gettingthe harness out, but just play around with it, its not that bad. I actually think you can get a gear from your local ford dealer, mine was 9.95 from steeda, plus shipping
__________________
'87 coupe, 308, world product windsor jr. heads, comp cams 220@.050/.512 @110 deg., roller cam,crane full roller rockers, 4bbl 600cfm holly carb,1 inch spacer, wiend aluminum intake, pullies, msd distributer/ignition, 1 5/8 bbk shorties, off road h-pipe 2 chamber flows, 3.73 posi rear end, P.S.T control arms, steeda tri-ax shifter, t-5, auto meter guages, and more to come (hopefully )
bosco is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
speedo gear 3.55's??? 23 tooth?? 1jimmy__d Windsor Power 3 04-21-2003 07:28 AM
The Right Speedo Gear... Titan Modular Madness 8 09-23-2002 05:42 PM
Tooth count on Speedo gear...... ~The Jester~ Windsor Power 0 09-23-2002 09:57 AM
If you've installed a 7 tooth speedo drive gear please read! bigsnake Windsor Power 3 11-25-2001 06:51 PM
23 tooth speedo gear any good? withamc Windsor Power 5 04-26-2001 10:39 PM


All times are GMT -5. The time now is 08:08 PM.


SEARCH