How much time Can I cut Off with 1 grand?

90LxDroptop · 11-20-2001, 10:18 PM

Hey everyone, This winter I'll be able to finally save up money for my car. (after I buy x-mas gifts that is) and well I figure I'll have at least $1,000...and I was wondering if it's possible to drop a second off my E/T with that? (after I put on my comp T/A's drag radials and my transgo shift kit is in) I don't think I can but I would like to do the best that I can to make this thing accellerate much better. thanx alot in advance.

Stang Runner · 11-20-2001, 11:12 PM

Get a 150 Shot and that will do that.

90LxDroptop · 11-20-2001, 11:26 PM

I guess you're right. Well then I guess i'm just aiming for the most out of my dollar...what do u guys think about...Long tube headers, Force II catback system, Underdrive pulleys, Mac cold air induction?...what do u guys think that would do? I'll probably have a lil' cash left over. who knows. adios

Stang Runner · 11-20-2001, 11:29 PM

Long tube headers, Force II catback system, Underdrive pulleys, Mac cold air induction That sounds Like a great way to spend it. I did all that stuff before I thought about the NO2 any how.

dinomite · 11-20-2001, 11:52 PM

Full exhaust is a good next step, possibly some pulleys as well. If you get some money (universal gift certificate) for christmas, how bout an intake!

Unit 5302 · 11-21-2001, 01:22 AM

For $600, a PI Stallion 2800rpm stall converter is likely to give you 3 tenths or better. That's the next step.

The other $400 can be used for other mods like electric fans, G3 alternator upgrade to support the fans, an N20 kit, whatever.

2FastLX · 11-21-2001, 01:48 AM

In my opinion gears and a full exhaust system should be the first mods you get. But, with an AOD a stall converter seems to be highly recommended. A stall will eat up quite a bit of that $1000 so with what you have left I'd just save up until you could do a full exhaust system. Don't spend it on piddly chit like a cold air kit just yet.

You could however benefit a little from underdrive pullies, but I'd do the 3G alternator upgrade first which is less than $100 if you go with a rebuilt 3G from Auto Zone. With that you could install an electric fan too. I got my fan from Auto Zone as well and it works great. It was like $65 for the biggest fan they had.

That would leave you a couple hundred. Maybe you could go with some control arms with the rest. People have been known to get stock Mustangs into the 12's with only suspension and gears so it is a thought.

But like I said, I'd go for exhaust. I know of quite a few people (myself included) that were amazed at how much more pep their cars had with exhaust upgrades alone. And long tubes is the way to go if you plan more mods in the future.

A full second off your ET? Possible. Anything you add will be an improvement at this point.

50togo · 11-24-2001, 10:06 PM

If you don't want to fill a nitrous bottle all the time, I would recommend installing a set of ported 1965 289 cyclinder heads (54.5cc combustion chamber). After seeing an article in a magazine, I installed a set on my car for about $600.00 (including all machine work) and cut .85 from my e.t. Oh yeah install a 155lph fuel pump, your going to need it. I did all the porting myself. Current best e.t. is 12.38 @ 110 MPH!!

HiFlow5 0 · 11-25-2001, 06:36 AM

stall converter first for sure!!! then work on exhaust up grades. a good converter will set u back about $600 from PI. a mac h pipe will be about $150, and force 2 cat back is $260. so thats a total of $1010. thats what i would do first with a grand.

11-20-2001, 10:18 PM	#1
90LxDroptop Registered Member Join Date: Jun 2001 Location: Arlington Hts. IL Posts: 315	How much time Can I cut Off with 1 grand? Hey everyone, This winter I'll be able to finally save up money for my car. (after I buy x-mas gifts that is) and well I figure I'll have at least $1,000...and I was wondering if it's possible to drop a second off my E/T with that? (after I put on my comp T/A's drag radials and my transgo shift kit is in) I don't think I can but I would like to do the best that I can to make this thing accellerate much better. thanx alot in advance. __________________ 90 LX Convertible 5.0 AOD 3.73 Gears, Underdrive Pulleys, TransGo shift kit, A servo, Subframe Connectors, o/r h-pipe, 2 chamber flows, Pony Wheels

11-20-2001, 11:12 PM	#2
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Get a 150 Shot and that will do that. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

11-20-2001, 11:26 PM	#3
90LxDroptop Registered Member Join Date: Jun 2001 Location: Arlington Hts. IL Posts: 315	I guess you're right. Well then I guess i'm just aiming for the most out of my dollar...what do u guys think about...Long tube headers, Force II catback system, Underdrive pulleys, Mac cold air induction?...what do u guys think that would do? I'll probably have a lil' cash left over. who knows. adios __________________ 90 LX Convertible 5.0 AOD 3.73 Gears, Underdrive Pulleys, TransGo shift kit, A servo, Subframe Connectors, o/r h-pipe, 2 chamber flows, Pony Wheels

11-20-2001, 11:29 PM	#4
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Long tube headers, Force II catback system, Underdrive pulleys, Mac cold air induction That sounds Like a great way to spend it. I did all that stuff before I thought about the NO2 any how. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

11-21-2001, 01:48 AM	#7
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	In my opinion gears and a full exhaust system should be the first mods you get. But, with an AOD a stall converter seems to be highly recommended. A stall will eat up quite a bit of that $1000 so with what you have left I'd just save up until you could do a full exhaust system. Don't spend it on piddly chit like a cold air kit just yet. You could however benefit a little from underdrive pullies, but I'd do the 3G alternator upgrade first which is less than $100 if you go with a rebuilt 3G from Auto Zone. With that you could install an electric fan too. I got my fan from Auto Zone as well and it works great. It was like $65 for the biggest fan they had. That would leave you a couple hundred. Maybe you could go with some control arms with the rest. People have been known to get stock Mustangs into the 12's with only suspension and gears so it is a thought. But like I said, I'd go for exhaust. I know of quite a few people (myself included) that were amazed at how much more pep their cars had with exhaust upgrades alone. And long tubes is the way to go if you plan more mods in the future. A full second off your ET? Possible. Anything you add will be an improvement at this point. __________________ Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241

11-20-2001, 11:52 PM	#5
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	Full exhaust is a good next step, possibly some pulleys as well. If you get some money (universal gift certificate) for christmas, how bout an intake!

11-21-2001, 01:22 AM	#6
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	For $600, a PI Stallion 2800rpm stall converter is likely to give you 3 tenths or better. That's the next step. The other $400 can be used for other mods like electric fans, G3 alternator upgrade to support the fans, an N20 kit, whatever.

11-24-2001, 10:06 PM	#8
50togo Registered Member Join Date: Nov 2001 Posts: 1	If you don't want to fill a nitrous bottle all the time, I would recommend installing a set of ported 1965 289 cyclinder heads (54.5cc combustion chamber). After seeing an article in a magazine, I installed a set on my car for about $600.00 (including all machine work) and cut .85 from my e.t. Oh yeah install a 155lph fuel pump, your going to need it. I did all the porting myself. Current best e.t. is 12.38 @ 110 MPH!!

11-25-2001, 06:36 AM	#9
HiFlow5 0 Registered Member Join Date: Mar 2000 Location: Springfield, Ma, usa Posts: 706	stall converter first for sure!!! then work on exhaust up grades. a good converter will set u back about $600 from PI. a mac h pipe will be about $150, and force 2 cat back is $260. so thats a total of $1010. thats what i would do first with a grand. __________________ NewEngland Auto www.baystategearheads.com -91 Mustang Coupe, ex 4cyl (sold) -99 F150, 3" lift, 35" Procomps, Magnaflow exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ozzfest Review Time	MidNiteBlu 5.0	Blue Oval Lounge	6	09-05-2002 06:16 PM
Did you say 20 grand? ( kinda long)	foxbodied	Blue Oval Lounge	5	08-30-2002 02:38 PM
Turning over a new leaf. Time to be Jerk Damien!	Mercury	Blue Oval Lounge	24	10-25-2001 01:43 PM
First time at track (timeslips included)	Gautam	Blue Oval Lounge	0	09-08-2001 10:42 PM
First time ever to track: results	jonnyk	Blue Oval Lounge	3	07-22-2001 01:42 AM