Will a Edelbrock Performer RPM and a Holley fit under the stock hood

tireburner163 · 11-25-2001, 04:29 PM

Will a Elelbrock performer RPM intake and a Holley four-barrel fit under my stock hood if I use a drop base air cleaner?

NotchJohnson · 11-25-2001, 11:17 PM

Hey man I

NotchJohnson · 11-25-2001, 11:19 PM

Hey man Im pretty sure it will fit, my buddy down here had either the performer or the performer rpm on his car with a 650 holley and it fit fine, you might want to get the covertible motor mounts, they drop the motor down a little lower that stock, so you can run a regular air cleaner. Good Luck, John

bosco · 11-25-2001, 11:33 PM

i know its not exactly the set up you have but i have a wiend intake, holly carb and a 1 inch spacer inbetween, 2 inch high ford motorsport air filter,with the stock hood, and im pretty sure stock motor mounts. i dont know if that helps any

Five0 · 11-25-2001, 11:45 PM

Yes it will fit, I ran that same thing under the stock hood for a while and had plenty of hood clearance.

6T9PONY · 11-26-2001, 01:14 AM

if it doesn't fit cut a big hole around the carb and get one of those scoops out of Summit that have the 3 red butterfly flaps that hook up to your throttle. But keep it out of the rain...

shovelnose · 11-27-2001, 01:57 AM

Edlebrock RPM, holley 600 cfm, 3X14" K/N, stock mounts. No problems here.

Could mabey get away with 1" spacer(Maybe not).

11-25-2001, 04:29 PM	#1
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Will a Edelbrock Performer RPM and a Holley fit under the stock hood Will a Elelbrock performer RPM intake and a Holley four-barrel fit under my stock hood if I use a drop base air cleaner? __________________ 1987 Buick T-type 1998 HD Electra Elide

11-25-2001, 11:17 PM	#2
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	Hey man I __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

11-25-2001, 11:19 PM	#3
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	Hey man Im pretty sure it will fit, my buddy down here had either the performer or the performer rpm on his car with a 650 holley and it fit fine, you might want to get the covertible motor mounts, they drop the motor down a little lower that stock, so you can run a regular air cleaner. Good Luck, John __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

11-25-2001, 11:33 PM	#4
bosco Registered Member Join Date: Nov 2001 Location: austin TX Posts: 115	i know its not exactly the set up you have but i have a wiend intake, holly carb and a 1 inch spacer inbetween, 2 inch high ford motorsport air filter,with the stock hood, and im pretty sure stock motor mounts. i dont know if that helps any __________________ '87 coupe, 308, world product windsor jr. heads, comp cams 220@.050/.512 @110 deg., roller cam,crane full roller rockers, 4bbl 600cfm holly carb,1 inch spacer, wiend aluminum intake, pullies, msd distributer/ignition, 1 5/8 bbk shorties, off road h-pipe 2 chamber flows, 3.73 posi rear end, P.S.T control arms, steeda tri-ax shifter, t-5, auto meter guages, and more to come (hopefully )

11-25-2001, 11:45 PM	#5
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	Yes it will fit, I ran that same thing under the stock hood for a while and had plenty of hood clearance. __________________ James Cox RHC Member #44 nochevy@hotmail.com 1991 Mustang LX Dart iron eagle block, 4340 28oz 347 crank, 4340 h-beam rods, probe ultra light pistons canfield heads “race ported by Brent Frazier”, solid roller cam and lifters “custom grind”, kooks 1 7/8" race headers, and much more. Engine built by Brent Frazier.

11-26-2001, 01:14 AM	#6
6T9PONY All about the Windsor. Join Date: Feb 2000 Posts: 2,052	if it doesn't fit cut a big hole around the carb and get one of those scoops out of Summit that have the 3 red butterfly flaps that hook up to your throttle. But keep it out of the rain...

11-27-2001, 01:57 AM	#7
shovelnose Registered Member Join Date: Oct 2000 Location: Ontario, Canada Posts: 234	Edlebrock RPM, holley 600 cfm, 3X14" K/N, stock mounts. No problems here. Could mabey get away with 1" spacer(Maybe not). __________________ 82 Mercury Capri 302, Comp. Cams, Tremec 3550, 3.73's, 12.8@106 N/A Kevin's Capri Kevin's Mustang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Typhoon Intake vs Edelbrock Performer RPM	lucheski	Windsor Power	1	07-13-2004 12:54 PM
GM Engines	BLOCKER	Blue Oval Lounge	2	04-13-2004 12:35 AM
Edelbrock Performer RPM heads......	topless5.0	Windsor Power	1	08-12-2002 10:20 PM
edelbrock performer rpm heads	hippi97	Windsor Power	2	04-01-2001 08:40 PM
Performer VS. Performer RPM	IMPULSERACING	Windsor Power	8	02-09-2001 12:45 PM