Just got my car back! PLUS THE NEW DYNO NUMBERS:)

1BAD93LX · 03-17-2001, 04:08 PM

I got my car from STREET STUFF & just got the new Dyno Numbers, WOW!

305HP 329 TQ
318 HP 341 TQ

I took it to my Testing site, Man this thing moves, When I just goose it in 1st, It blows the Nittos Away, Then hit second, It blows the Nittos away more, Then I hit Third & it frys the hell out of them & then hooks, Then I hit 4th & it Chirps the tires real hard!

I am going to the track tommorow to get some Times, Wish me luck!

SEB,

------------------
93 Notchback Red with Chrome Ponys,
Mods are 4.10s FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, March Ram Air, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-7 Crane Roller Rockers, on stock Heads,Electric Fan. Best ET: 13,143 @101 mph w a 1.749 60ft.

1BAD93LX · 03-17-2001, 04:15 PM

OH here is what I did in my new SIG

SEB,

------------------
93 Notchback Red with TFS Heads, TFS Track Heat Intake, Anderson N-4 Cam 512/512 LIFT 222/Intake, 230/ Exhaust, Flaming River Manual Steering & Rack & Pinion, Anderson N/A Powerpipe, Moser 28 spline Axles, Eibach Drag Springs, Chrome Cobra Rs, Nitto Drag Radials, 4.10s, FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-6 FMS Rock

slider · 03-17-2001, 04:37 PM

thats nice

is it AOD or 5spd?

MY91GT · 03-17-2001, 04:46 PM

Nice power!!! Where did you get your car dynoed at and how much did it cost? I am from south holland which is a south sub of chicago and I dont want to treck to anderson just to get my car dynoed. Are you going to 66 tomorrow?

------------------
TW Heads, Edlebrock RPM, 75mm TB, 75mm MM, Anderson N-2 cam, stock block, underdrives, paxton regulator, bbk 155 intank, 30lbers, motorsport alum rad msd ignition and coil, 3.73 gear, Tremec 3550, Motorsport HD clutch, K&N, hooker shorties, pacesetter h-pipe, and dynomax cat back, mac upper and lower control arms, no front sway bar. I think that's it. GO ILLINI!!!
Waiting for good weather for new times.

1BAD93LX · 03-17-2001, 07:16 PM

IT is a 5 spd, No the dyno was free! I paid STREET STUFF to install my Heads & Cam & Intake, So it comes with the install,

I am going to US41 Moraco Indiana,

SEB,

------------------
93 Notchback Red with TFS Heads, TFS Track Heat Intake, Anderson N-4 Cam 512/512 LIFT 222/Intake, 230/ Exhaust, Flaming River Manual Steering & Rack & Pinion, Anderson N/A Powerpipe, Moser 28 spline Axles, Eibach Drag Springs, Chrome Cobra Rs, Nitto Drag Radials, 4.10s, FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-6 FMS Rock

03-17-2001, 04:08 PM	#1
1BAD93LX Registered Member Join Date: Mar 2001 Location: Naperville,IL. Posts: 9	Just got my car back! PLUS THE NEW DYNO NUMBERS:) I got my car from STREET STUFF & just got the new Dyno Numbers, WOW! 305HP 329 TQ 318 HP 341 TQ I took it to my Testing site, Man this thing moves, When I just goose it in 1st, It blows the Nittos Away, Then hit second, It blows the Nittos away more, Then I hit Third & it frys the hell out of them & then hooks, Then I hit 4th & it Chirps the tires real hard! I am going to the track tommorow to get some Times, Wish me luck! SEB, ------------------ 93 Notchback Red with Chrome Ponys, Mods are 4.10s FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, March Ram Air, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-7 Crane Roller Rockers, on stock Heads,Electric Fan. Best ET: 13,143 @101 mph w a 1.749 60ft.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
331 Dyno results	302 LX Eric	Windsor Power	12	04-29-2004 10:13 PM
Dyno resource website	97mustangcobrad	Racer's Club House	0	11-08-2001 11:38 AM
Dyno test Holley/Diablo custom chip	exgmguy	Windsor Power	3	10-22-2001 05:23 PM
Chassis dyno numbers	LfiveohX	Stang Stories	22	08-01-2001 08:55 PM
Dyno Numbers on new car	SaleenGTS	Windsor Power	7	02-15-2001 10:26 PM

03-17-2001, 04:15 PM	#2
1BAD93LX Registered Member Join Date: Mar 2001 Location: Naperville,IL. Posts: 9	OH here is what I did in my new SIG SEB, ------------------ 93 Notchback Red with TFS Heads, TFS Track Heat Intake, Anderson N-4 Cam 512/512 LIFT 222/Intake, 230/ Exhaust, Flaming River Manual Steering & Rack & Pinion, Anderson N/A Powerpipe, Moser 28 spline Axles, Eibach Drag Springs, Chrome Cobra Rs, Nitto Drag Radials, 4.10s, FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-6 FMS Rock

03-17-2001, 04:37 PM	#3
slider Registered Member Join Date: Mar 2001 Location: San Diego, CA, USA Posts: 86	thats nice is it AOD or 5spd?

03-17-2001, 04:46 PM	#4
MY91GT Registered Member Join Date: Mar 1999 Location: University of Illinois-Urbana/Champaign Posts: 370	Nice power!!! Where did you get your car dynoed at and how much did it cost? I am from south holland which is a south sub of chicago and I dont want to treck to anderson just to get my car dynoed. Are you going to 66 tomorrow? ------------------ TW Heads, Edlebrock RPM, 75mm TB, 75mm MM, Anderson N-2 cam, stock block, underdrives, paxton regulator, bbk 155 intank, 30lbers, motorsport alum rad msd ignition and coil, 3.73 gear, Tremec 3550, Motorsport HD clutch, K&N, hooker shorties, pacesetter h-pipe, and dynomax cat back, mac upper and lower control arms, no front sway bar. I think that's it. GO ILLINI!!! Waiting for good weather for new times.

03-17-2001, 07:16 PM	#5
1BAD93LX Registered Member Join Date: Mar 2001 Location: Naperville,IL. Posts: 9	IT is a 5 spd, No the dyno was free! I paid STREET STUFF to install my Heads & Cam & Intake, So it comes with the install, I am going to US41 Moraco Indiana, SEB, ------------------ 93 Notchback Red with TFS Heads, TFS Track Heat Intake, Anderson N-4 Cam 512/512 LIFT 222/Intake, 230/ Exhaust, Flaming River Manual Steering & Rack & Pinion, Anderson N/A Powerpipe, Moser 28 spline Axles, Eibach Drag Springs, Chrome Cobra Rs, Nitto Drag Radials, 4.10s, FRPP Alum Driveshaft, Mac 1 5/8 Long Tube Headers, Pro Chamber H-Pipe, 2 Chamber Flowmaster, Kenny Brown Subs, Lower Control Arms, 24lb Injectors, Pro M 75 Bullet, Pullys, AC, Elimnater, No Smog, 70 EGR, with 65 TB, 1-6 FMS Rock