MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Poll: Whicj heads for my new 306?
Poll Options
Whicj heads for my new 306?

Reply
 
Thread Tools Rating: Thread Rating: 1 votes, 5.00 average. Display Modes
Old 12-14-2001, 01:04 PM   #1
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default Help me Pick What Heads...

Okay... I am about to embark on the greatest journey for all mustang lovers, a new motor. I am looking to either have a local shop rebuild my shortblock or purchase a crate shortblack from DSS, Keith Craft, Central Coast, etc. (any thoughs on that are welsome as well). I'm thinking an E cam but maybe Crane's version of the E cam. But when it comes to the heads I am stumped. My only real criteria is that I want to spend less than a grand ($1000) on them. I want max flow because in the near furture, a blower or at the very least a 150 hp shot will be in the making. So this is what I think my choices are (if there is some that I am overlooking, let me know):

(1) Trickflow Tisted Wedge
(2) Edelbrock Performer
(3) AFR
(4) Brodix
(5) GT-40X
(6) Other
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-14-2001, 01:24 PM   #2
1BAD89
Tubbed and Juiced
 
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
Default

If you only want to spend a $1000, I'd get the Trick Flow Twisted Wedge Heads. Get a shortblock from D.S.S., then you'd know it was built right, and you'd probaly get it quicker, and it would probaly be cheaper or about the same price as a local.
1BAD89 is offline   Reply With Quote
Old 12-14-2001, 02:36 PM   #3
Coupe Devil
Moderator
 
Coupe Devil's Avatar
 
Join Date: Mar 2001
Location: Myrtle Beach SC
Posts: 1,643
Default

Yeah go with the Trick Flows. I am gonna use the R-series next time. I think for a thousand bucks they are the better buy.

Brad
__________________
1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5.

Built Ford Tough Moderator
Coupe Devil is offline   Reply With Quote
Old 12-14-2001, 02:57 PM   #4
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default

Okay, well then here's another question. Why are all the DSS shortblocks a $100 more if you are going to use TFS TW heads?
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-14-2001, 04:55 PM   #5
NO SLO PK
Registered Member
 
NO SLO PK's Avatar
 
Join Date: Mar 1999
Location: Arcadia, CA, USA
Posts: 731
Default

Probably because the valve reliefs in the pistons are different.
__________________
Russ L

'91 LX - 331 w/ Procharger
'03 Cobra Convertible - Pullied
'94 Lightning
'65 Mustang Coupe
NO SLO PK is offline   Reply With Quote
Old 12-14-2001, 07:13 PM   #6
5ohCOUPE
Registered Member
 
Join Date: Sep 2001
Location: ORANGE PARK FL. USA
Posts: 208
Default

TFS are ok but I like the aluminum World Products Windsor SR. I have the Windsor JR on mine because its just a 302 with mild mods. But for max flow and PRICE the SRs are a good choice. The cast iorn SRs are even more cheap.
__________________
91 LX COUPE, 3.73 gears, 2 1/2 inch H-Pipe, 1 5/8 MAC long tube headers, 73 MM C&L MAF, 70 MM MAC TB, LUNATI cam,1.7 TFS Rockers, TFS Track Heat heads, TFS Track Heat intake, T5 with PRO 5.0 shifter, Griffin aluminum radiator, Fluid Damper, SSM traction bars, 190 GPH in tank fuel pump. And more to come.
5ohCOUPE is offline   Reply With Quote
Old 12-15-2001, 07:20 AM   #7
Mach 1
Registered Member
 
Mach 1's Avatar
 
Join Date: May 1999
Location: Georgia
Posts: 3,866
Default

if you want to spend under $1000.00, you already eliminated half the choices in your poll. Did you do price research first?
__________________
2002 GT
1993 GT (SOLD)
'93 Mustang GT
RHC member #142
Mach 1 is offline   Reply With Quote
Old 12-15-2001, 10:02 AM   #8
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

I am think the AFR's are the best out of the box out there But You did say 1000 or less and those are 1300+ for a 1000 I would say get the TFS heads are the next best thing and they are in your range you are looking for too.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm
Stang Runner is offline   Reply With Quote
Old 12-15-2001, 10:16 AM   #9
SaleenGTS
RICE taste like Chicken
 
SaleenGTS's Avatar
 
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
Default

I have had 2 sets of TW's, a set of 6037's and a set of GT-40's on my 93 Cobra I had. I like the TW's best of all. I got mine for %950, O-Ringed, and from Saleen, who is notorious for jacking prices up. I dunno why these were so cheap.

TW's perform a litle better than the 165's, and a lot betther than the rest on that list.
__________________
Dustin
89 Saleen GT Sport
Supercharged 306
Started her up 6/8/03

Old Motor
Supercharged 347

516 rwhp
553 rwtq

11.249@126.83

1997 Honda CBR 1100XX Super Blackbird
162 hp
SaleenGTS is offline   Reply With Quote
Old 12-15-2001, 10:30 AM   #10
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Default

I think the AFR's are better but they are both very close The Flow ### for the AFR a very good and so are the TFS But down low the Ex on the AFR's is better and they come with stuff like a 5 angle job out of the box BUT the TFS With same work done will be better so it is up to you what you get. Mine 165's flowed better than what AFR said by all most 8 cfm the ex side that is and 2 less on the Intake side then what they say But the heads will work very good with a Blower or NO2 with the Flowing of the EX side being so good on the heads.
But it is very hard to compare the 2 the AFR 165 have 1.90 Intake on them get very close too the TW that are 2.02 they flow a bit better up high like 2-6cfm better but that meand the 165 have a higher velocity on the air that is goin In and helps make the gas mix a bit better and yes the TW in some times do better and the same with the AFR's too BUT lest say the 185 they are 2.02 Intake and it is Far Better than the TW (More Flow) on the Intake side. Sorry I amd not saying the TW are Bad they are Very good And Yes a better price too But it all realy matters on what the combo realy is.
I am not saying you dont know what you are talking about Heck I am not saying i realy know what I am talking about.
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe
Drive Train: 3.55, T-5 with a Pro 5.0 shifter
12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Last edited by Stang Runner; 12-15-2001 at 10:54 AM..
Stang Runner is offline   Reply With Quote
Old 12-15-2001, 04:44 PM   #11
fastang
Registered Member
 
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
Default

I have gained about 60rwhp from the unported TFS head/Holley intake swap. The TFS heads will outflow the AFR 165's mostly because the AFR 165's have smaller valves. The AFR 185's are probably the best head around right now but you cant use them on a stock shortblock without notching your stock pistons(which is risky) or buing a new set of dished pistons.

The TFS heads and the AFR 185's both have 202 intake valves but the Trick flows are cantered at an angle so the large valves will clear the pistons while the AFR's will not.

However ALL AFR heads come cnc ported too while the TFS heads are not.......but then again the TFS heads are about 400 bucks cheaper and can be CNC ported for a few extra bucks too.
__________________
98 GT manual trans, Magna Flow exh.
old car: 95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.
fastang is offline   Reply With Quote
Old 12-16-2001, 04:03 AM   #12
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

TFS
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 12-17-2001, 04:26 PM   #13
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default

So if I were to go with the TFS heads, would they work without getting new pistons? I am going to bebuild, but I wasn't planning on getting new pistons unless I had to.
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-18-2001, 01:02 AM   #14
Mach 1
Registered Member
 
Mach 1's Avatar
 
Join Date: May 1999
Location: Georgia
Posts: 3,866
Default

with 170K on motor, you should buy the AFR 185's (best available) and buy new pistons that will work with them.
__________________
2002 GT
1993 GT (SOLD)
'93 Mustang GT
RHC member #142
Mach 1 is offline   Reply With Quote
Old 12-18-2001, 01:05 AM   #15
byrnech
Registered Member
 
byrnech's Avatar
 
Join Date: Jun 2001
Location: Anderson, TX.
Posts: 166
Default

Here is my idea, get the new block with new pistons. But get the inline valves instead of the TW's which are 100.00 or so more. Save up two hundred more dollars plus the one hundred you saved by not getting the TW pistons and get the AFR 185's. Dyno testing has shown that the 185's don't lose out on the low end compared to the 165's, and they gain a lot more on the top end. Unlike a world products JR vs. SR head on the same set up. What is 200.00 more when you are already spending a couple thousand? Do it right the first time so you don't have to do it again. I may be a little partial to the AFR's because I have them, but before you buy the heads get a chance to see each one in person if you can. I think you will be sold on them as well.
__________________
331 10:1, AFR 185's, TFS-R intake
byrnech is offline   Reply With Quote
Old 12-18-2001, 08:24 AM   #16
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default

Fordmuscle.com did a shoot-out between all the popular heads out there and one thing that I was VERY suprised at was the GT-40X heads. They tested the to flow 235 CFM (at .7 lift on the intake side) and 167 CFM (at .6 lift on the exhaust). That compared to the Edelbrock Performers (215 CFM intake at .6 lift, 179 CFM exhaust at .7 lift) was interesting. And then compared to TFS heads, (242 CFM intake at .6 lift, 198 CFM exhaust at .7 lift) they are not much worse. They didn't test AFR heads. Does anyone now what the numbers on the AFR heads (out of the box) are?
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-18-2001, 11:57 PM   #17
byrnech
Registered Member
 
byrnech's Avatar
 
Join Date: Jun 2001
Location: Anderson, TX.
Posts: 166
Default

If I am not mistaken they are rated at 270 and 190 cfm intake and exhaust. MM&FF got 273 and 191 out of the box, if i'm not mistaken. For the 185's that is. There are a couple of places that sell the 185's and the 165's for the same price, pedistal or stud mount.
__________________
331 10:1, AFR 185's, TFS-R intake
byrnech is offline   Reply With Quote
Old 12-19-2001, 08:36 AM   #18
MustangDanny
Registered Member
 
MustangDanny's Avatar
 
Join Date: Nov 2001
Location: Dover, DE
Posts: 70
Default

This place has ported AFR 165's and 185's for the same price ($1299)

http://www.totalengineairflow.com/pr...head/index.htm
__________________
--
-1991 LX 5.0 Sedan, 5 spd (new 'Z' tranny), 3.73, aluminum DS, Hedman headers, 190 LPH, MAC CAI, Flowmaster catback. (170K miles on motor)
Best ET: 14.434 @ 96.04 MPH - 2.205 60' (Radials)
My Notch
MustangDanny is offline   Reply With Quote
Old 12-23-2001, 06:55 PM   #19
MiracleMax
Registered Member
 
Join Date: Apr 1999
Location: Hayes, Va, USA
Posts: 798
Default

Just don't use a Edelbrock Vic 5.0 efi intake with the 185cc heads, you'll have to a bit of port matching to get it to work
__________________
2002 5M GT (99% stock)
1991 5M LX (30% stock)
patiently awaiting my satin silver 07 Mach 1, and don't forget the shaker
MiracleMax is offline   Reply With Quote
Old 12-23-2001, 09:58 PM   #20
Unit 5302
Registered Member
 
Join Date: May 1999
Posts: 5,246
Default

If you're going for a N/A 306 you don't need anything more than the 165cc runner heads like the TFS TW, or the AFR 165's. Since the AFR's are way more than $1k, and the TFS TW outflow them (everywhere from what I've seen), it cuts down the options.

The Windsor heads are crap at low lifts, and from the flow data, you can see how linear their flow rate is. They also have very large runners which hurts port velocity. If you talk to the guys who run TFS heads, they have great low end, along with superior top end.

The GT40x head flow numbers I've seen haven't been all that impressive compared to AFR's or TFS's.
Unit 5302 is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help I need heads!! SmokinStangGT Windsor Power 18 05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6 surfbeast Modular Madness 9 11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads slow98 Modular Madness 6 10-25-2002 04:28 PM
GT-40 heads 5.0 Pony Windsor Power 1 09-10-2002 10:26 PM
Which heads are beter? patman Classic Mustangs 3 12-02-1999 03:42 AM


All times are GMT -5. The time now is 03:39 AM.


SEARCH