which exhaust system is the loudest for a mustang?

Chevysucks · 03-05-2002, 11:15 PM

how do the super turbos sound compared to the mac's

gtsr515 · 03-05-2002, 11:23 PM

The loudest system would be straight pipes, and then in my opinion, 2 chamber flowmasters, followed closely by the big buck Borla system.

chatcher · 03-06-2002, 09:34 PM

i have a offroad hpipe then flowmasters i think i sound very good nice low rumble a idle roars at full throttle definatly my preferance

WADS56 · 03-07-2002, 01:45 AM

DR. gas X-pipe and race bullits. I love the sound it makes at WOT.

When I wan to keep it quiet for street driving I welded a header flange at the end of the bullits and bolt up a set of "purple hornies" and they dump right before the axle. It takes 10 minuts to take them on and off.

Sonics2042 · 03-08-2002, 12:23 AM

I don't really like the flowmasters. They are, however, one of the louder exhaust systems. The MAC exhaust itself isn't very loud compared to some other brands. If you get the full exhaust setup (headers, h-pipe, & cat-back), then I love the sound of that setup.

http://www.mustangwarehouse.com/exha...und-clips.html

Here are some sound clips if you are interested

Thanks,
DoranW

bubba32 · 03-10-2002, 10:48 PM

I use a MAC system thru-out (shorty headers, off road pipe, and 2 1/2 Flo Path cat back system). I have to admit , it has a very distinct sound. I don't think I 've gotten used to it yet. The burbble at idle is kinda cool, but the roar at WOT kinda scares me sometimes. I wonder if it is too loud.

Sonics2042 · 03-11-2002, 01:26 AM

I will probably finish off my exhaust with MAC stuff, just because for what I am doing, I think it is the best bang for your buck. If I decide to get a 93 cobra, I will be wanting make everything best of the best. In that case, I would probably go BBK Full length headers, Bassani x-pipe, and a borla cat-back.

That would be my setup of choice, but it would also be like 4 times as expensive

Thanks,
DoranW

Sonics2042 · 03-11-2002, 02:14 AM

I will probably finish off my exhaust with MAC stuff, just because for what I am doing, I think it is the best bang for your buck. If I decide to get a 93 cobra, I will be wanting make everything best of the best. In that case, I would probably go BBK Full length headers, Bassani x-pipe, and a borla cat-back.

That would be my setup of choice, but it would also be like 4 times as expensive

Thanks,
DoranW

03-05-2002, 11:15 PM	#1
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	which exhaust system is the loudest for a mustang? how do the super turbos sound compared to the mac's __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

03-05-2002, 11:23 PM	#2
gtsr515 Registered Member Join Date: Nov 2001 Location: Sunny, Hot, Sebring, Florida Posts: 725	The loudest system would be straight pipes, and then in my opinion, 2 chamber flowmasters, followed closely by the big buck Borla system. __________________ Remember...2nd place is 1st place for losers!

03-06-2002, 09:34 PM	#3
chatcher Registered Member Join Date: Jun 2001 Location: butler pa Posts: 303	i have a offroad hpipe then flowmasters i think i sound very good nice low rumble a idle roars at full throttle definatly my preferance __________________ 92lx wannabe saleen

03-07-2002, 01:45 AM	#4
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	DR. gas X-pipe and race bullits. I love the sound it makes at WOT. When I wan to keep it quiet for street driving I welded a header flange at the end of the bullits and bolt up a set of "purple hornies" and they dump right before the axle. It takes 10 minuts to take them on and off. __________________ 79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49

03-08-2002, 12:23 AM	#5
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	I don't really like the flowmasters. They are, however, one of the louder exhaust systems. The MAC exhaust itself isn't very loud compared to some other brands. If you get the full exhaust setup (headers, h-pipe, & cat-back), then I love the sound of that setup. http://www.mustangwarehouse.com/exha...und-clips.html Here are some sound clips if you are interested Thanks, DoranW __________________ What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim

03-10-2002, 10:48 PM	#6
bubba32 Registered Member Join Date: Jan 2002 Location: apex, north carolina Posts: 4	I use a MAC system thru-out (shorty headers, off road pipe, and 2 1/2 Flo Path cat back system). I have to admit , it has a very distinct sound. I don't think I 've gotten used to it yet. The burbble at idle is kinda cool, but the roar at WOT kinda scares me sometimes. I wonder if it is too loud.

03-11-2002, 01:26 AM	#7
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	I will probably finish off my exhaust with MAC stuff, just because for what I am doing, I think it is the best bang for your buck. If I decide to get a 93 cobra, I will be wanting make everything best of the best. In that case, I would probably go BBK Full length headers, Bassani x-pipe, and a borla cat-back. That would be my setup of choice, but it would also be like 4 times as expensive Thanks, DoranW

03-11-2002, 02:14 AM	#8
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	I will probably finish off my exhaust with MAC stuff, just because for what I am doing, I think it is the best bang for your buck. If I decide to get a 93 cobra, I will be wanting make everything best of the best. In that case, I would probably go BBK Full length headers, Bassani x-pipe, and a borla cat-back. That would be my setup of choice, but it would also be like 4 times as expensive Thanks, DoranW

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Speed Secret # 4	jim_howard_pdx	Windsor Power	13	11-10-2002 03:42 PM
I'm getting a 1991 Mustang GT what exhaust should i get ??	PSstangsj15	Blue Oval Lounge	1	07-06-2001 08:19 PM
Mustang History Rewritten	Mustangbelle306	Blue Oval Lounge	18	05-08-2001 05:43 PM
exhaust system	cleangreenmachine	Windsor Power	10	01-08-2001 11:59 AM