Cam Poll, PLEASE VOTE!

1quiksteed · 04-02-2001, 09:41 PM

OK everyone, please vote for which cam you'd choose for the following combination. A simple 1, 2, or "other" w/ cam name & specs will do just fine. BUT if you want to mention anything I'm all ears! I need to decide by Wednesday April 4th so please respond!

Here's the combo: (this should be everything you need to know)

Stock 302 block/pistons/crank
TFS Track Heat intake
TFS Twisted Wedge heads
65mm TB
Crane 1.6 roller rockers (Golds)
Kirban or Aeromotive AFPR (and guage)
255lph in-tank pump
stock #19s (see if they work, if not upgrade to #24s)
1 5/8ths unequal shorties
2 1/2" off-road H-pipe
2 1/2" cat-back
3.73s
5 speed
custom cold air pipe

PLEASE VOTE!!!

Here are the cam choices
1) TFS Stage 1 (TFS-5140200)
221*/225* duration @.050"
.499"/ .510" lift
lobe sep. 112

2) Lunati EFI Grind (51014)
218*/ 226* duration @ .050"
.500"/ .510" lift
lobe sep. 112

Note these cams spec exactly the same so if someone can explain why a duration should be higher or lower that would be a great help!

Thanks everyone!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vote Guys!!!	STR864	Blue Oval Lounge	4	06-23-2004 12:43 AM
Check out my web page THEN VOTE!	RedLilPony	Blue Oval Lounge	11	11-14-2002 12:40 AM
A poll	rppngears	Windsor Power	1	08-08-2002 01:13 PM
OK, That's it... Soap box up (Poll: Muslims call U.S. 'ruthless, arrogant')	Hammer	Blue Oval Lounge	24	03-04-2002 02:50 AM

04-02-2001, 09:41 PM	#1
1quiksteed Registered Member Join Date: Apr 2001 Posts: 4	Cam Poll, PLEASE VOTE! OK everyone, please vote for which cam you'd choose for the following combination. A simple 1, 2, or "other" w/ cam name & specs will do just fine. BUT if you want to mention anything I'm all ears! I need to decide by Wednesday April 4th so please respond! Here's the combo: (this should be everything you need to know) Stock 302 block/pistons/crank TFS Track Heat intake TFS Twisted Wedge heads 65mm TB Crane 1.6 roller rockers (Golds) Kirban or Aeromotive AFPR (and guage) 255lph in-tank pump stock #19s (see if they work, if not upgrade to #24s) 1 5/8ths unequal shorties 2 1/2" off-road H-pipe 2 1/2" cat-back 3.73s 5 speed custom cold air pipe PLEASE VOTE!!! Here are the cam choices 1) TFS Stage 1 (TFS-5140200) 221/225 duration @.050" .499"/ .510" lift lobe sep. 112 2) Lunati EFI Grind (51014) 218/ 226 duration @ .050" .500"/ .510" lift lobe sep. 112 Note these cams spec exactly the same so if someone can explain why a duration should be higher or lower that would be a great help! Thanks everyone!!!