gt40p headers

cjm · 04-03-2001, 09:46 AM

who has the best price on the frpp gt40p headers

y2kcobrar · 04-03-2001, 10:10 AM

Try GEFRacing.com M6049P303 for $240 each.
http://www.gefracing.com

y2kcobrar · 04-03-2001, 10:26 AM

Oops! When I first looked I thougt you said heads. Anyway try GEF on the headers too. $225 for the pair.

Shotgun28 · 04-03-2001, 10:44 AM

DO they have long tube headers that work as well?

------------------
91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

cjm · 04-03-2001, 11:06 AM

thanks for the info, I'll give them a call

Kenn · 04-06-2001, 03:28 PM

I talked with MAC and they dont offer a specific P head long tube. They did however tell me to run the standard 1 5/8 long tube header. I have bolted them up and they work. I have to use a 5/8 spark plug socket with the flats on the end and turn it with a 3/4 open end wrench on several of the plugs, but other than that they fit fine. Several of the plug wires come close, but with the SVO $40 wires I have they dont burn. Hope this helps ya.

egiap's 5.0 · 04-07-2001, 07:32 AM

I beleive central coast mustang sells there
own gt40p header for 199. Saw this in april issue of muscle mustang. This is there shorty header. Good luck

------------------
Amsoil dealer, find out about amsoil's preferred customer program, buy at dealer cost.

04-03-2001, 09:46 AM	#1
cjm Registered Member Join Date: Dec 2000 Location: tuscumbia, Al. Posts: 17	gt40p headers who has the best price on the frpp gt40p headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gt40p headers 95 stang	sduke23	Windsor Power	1	04-25-2004 01:29 AM
Anyone have problems with MAC headers??	HiFlow5 0	Windsor Power	15	05-30-2002 08:30 AM
Headers should I or shouldn't I....Need Advice Quick Please	Mustang_GT_90	Windsor Power	9	05-01-2002 01:16 PM
BBK one-piece flange or MAC individual flange long tube headers.	Fox Body	Windsor Power	10	04-03-2001 04:25 PM
gt40p tri-y headers from ccm	cjm	Classic Mustangs	2	04-02-2001 07:48 AM

04-03-2001, 10:10 AM	#2
y2kcobrar Registered Member Join Date: Dec 2000 Location: Atlanta, GA Posts: 17	Try GEFRacing.com M6049P303 for $240 each. http://www.gefracing.com

04-03-2001, 10:26 AM	#3
y2kcobrar Registered Member Join Date: Dec 2000 Location: Atlanta, GA Posts: 17	Oops! When I first looked I thougt you said heads. Anyway try GEF on the headers too. $225 for the pair.

04-03-2001, 10:44 AM	#4
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	DO they have long tube headers that work as well? ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

04-03-2001, 11:06 AM	#5
cjm Registered Member Join Date: Dec 2000 Location: tuscumbia, Al. Posts: 17	thanks for the info, I'll give them a call

04-06-2001, 03:28 PM	#6
Kenn Registered Member Join Date: Nov 1999 Location: Mi Posts: 104	I talked with MAC and they dont offer a specific P head long tube. They did however tell me to run the standard 1 5/8 long tube header. I have bolted them up and they work. I have to use a 5/8 spark plug socket with the flats on the end and turn it with a 3/4 open end wrench on several of the plugs, but other than that they fit fine. Several of the plug wires come close, but with the SVO $40 wires I have they dont burn. Hope this helps ya.

04-07-2001, 07:32 AM	#7
egiap's 5.0 Registered Member Join Date: Apr 2001 Location: Mansfield, OH. Posts: 113	I beleive central coast mustang sells there own gt40p header for 199. Saw this in april issue of muscle mustang. This is there shorty header. Good luck ------------------ Amsoil dealer, find out about amsoil's preferred customer program, buy at dealer cost.