Anyone wana trade a pro5.0 shifter for my steeda tri-ax?

zepherman · 08-01-2002, 03:56 AM

Well, any takers?

Conman · 08-01-2002, 06:14 AM

what's the matter with the tri-ax
I thought these two shifters were equally matched at the top of the shifter aftermarket

you just looking to try something different?

306bullet · 08-01-2002, 07:04 AM

Better yet when I purchased my car it came with a tri-ax base and a pro5.0 handle. Don't ask me why?

Eric4Nitrous · 08-01-2002, 08:50 AM

I'll trade ya a Pro-shifted clutchless liberty 5 speed

302 LX Eric · 08-01-2002, 12:04 PM

Why do you want to trade? Do you not like the Tri-Ax?

E

Agent_4573 · 08-01-2002, 02:26 PM

HOw bout i just give you some $$$ for it? How much u want?

zepherman · 08-01-2002, 03:06 PM

my tri-ax works great. i drove a buddys car recenly and he has a pro5.0 andi kinda liked it and i fel liketryin something new.

zepherman · 08-02-2002, 01:19 AM

come on, nobody wants to trade? Its in perfect condition and ill throw in my carbon fiber shift knob.

08-01-2002, 03:56 AM	#1
zepherman Registered Member Join Date: May 2001 Location: Oklahoma City OK USA Posts: 236	Anyone wana trade a pro5.0 shifter for my steeda tri-ax? Well, any takers? __________________ 90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter. 12.9 @ 108

08-01-2002, 06:14 AM	#2
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	what's the matter with the tri-ax I thought these two shifters were equally matched at the top of the shifter aftermarket you just looking to try something different? __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

08-01-2002, 08:50 AM	#4
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	I'll trade ya a Pro-shifted clutchless liberty 5 speed __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

08-01-2002, 12:04 PM	#5
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Why do you want to trade? Do you not like the Tri-Ax? E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

08-01-2002, 02:26 PM	#6
Agent_4573 Registered Member Join Date: May 2002 Location: New Jersey Posts: 375	HOw bout i just give you some $$$ for it? How much u want? __________________ '89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com

08-01-2002, 07:04 AM	#3
306bullet Registered Member Join Date: Jul 2002 Location: Indiana Posts: 51	Better yet when I purchased my car it came with a tri-ax base and a pro5.0 handle. Don't ask me why?

08-01-2002, 03:06 PM	#7
zepherman Registered Member Join Date: May 2001 Location: Oklahoma City OK USA Posts: 236	my tri-ax works great. i drove a buddys car recenly and he has a pro5.0 andi kinda liked it and i fel liketryin something new. __________________ 90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter. 12.9 @ 108

08-02-2002, 01:19 AM	#8
zepherman Registered Member Join Date: May 2001 Location: Oklahoma City OK USA Posts: 236	come on, nobody wants to trade? Its in perfect condition and ill throw in my carbon fiber shift knob. __________________ 90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter. 12.9 @ 108

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pro5.0 vs Steeda Tri-Ax shifter	Mustang_289	Windsor Power	7	10-03-2002 11:23 PM
Best Shifter For The T45 Trans. Steeda Or Pro 5.0?	steedamustang01	Modular Madness	11	04-10-2002 08:59 AM
Installing A Steeda Tri-Ax Shifter	BowTie Eater 5 Liter	Windsor Power	2	12-30-2001 09:48 PM
Just bought the Steeda Tri-ax Shifter	swtstang	Windsor Power	2	05-24-2001 02:47 AM
A newbie dives in: steeda tri-ax shifter	thebean311	Blue Oval Lounge	3	03-09-2001 02:37 PM