Please HELP!!!

TMASTER · 10-19-2002, 11:14 PM

I just spent 5 hours porting my 5.0 HP intake inlet hole and put a new BBK EGR Plate on with a bbk 70mmTB.. I started up fine as normal and let the car warm up for 2 min.. then I rolled out and it died!!! Now it wont start and eveything it hooked up right....
I checked the fuel cut off switch and its pushed in... the car makes normal starting noise but doesnt turn over!!! Any idea's please answer!! 93 GT 5.0L 5speed

HotRoddin · 10-19-2002, 11:54 PM

Define doesn't turn over ? Do you mean it doesn't fire or do you mean its doesn't turn at all as in frozen ??
If you mean frozen then take the plugs out then hit start to check for hydrolock (one of the cylinders full of liquid)

TMASTER · 10-20-2002, 01:07 AM

it makes the normal starting noises but doesnt fire... i think its a gas problem somethings wrong!

Damn i cant figure this one out... I ve gone over the wires where i worked 10 times, Maybe the fuel pump went out? Would it still make the noise that it does normally when you turn the ignition key to on, if it is bad?

TMASTER · 10-20-2002, 05:37 PM

My MSD A6 is dead! I hooked up my old ignition and it starts up right away! the MSD started poor anyway... Now i can make it to work on monday

WOOHOOO FORD IGNITION!

10-19-2002, 11:14 PM	#1
TMASTER Registered Member Join Date: Sep 2002 Location: TEXAS Posts: 161	Please HELP!!! I just spent 5 hours porting my 5.0 HP intake inlet hole and put a new BBK EGR Plate on with a bbk 70mmTB.. I started up fine as normal and let the car warm up for 2 min.. then I rolled out and it died!!! Now it wont start and eveything it hooked up right.... I checked the fuel cut off switch and its pushed in... the car makes normal starting noise but doesnt turn over!!! Any idea's please answer!! 93 GT 5.0L 5speed

10-20-2002, 01:07 AM	#3
TMASTER Registered Member Join Date: Sep 2002 Location: TEXAS Posts: 161	turns over but no start it makes the normal starting noises but doesnt fire... i think its a gas problem somethings wrong! Damn i cant figure this one out... I ve gone over the wires where i worked 10 times, Maybe the fuel pump went out? Would it still make the noise that it does normally when you turn the ignition key to on, if it is bad? Last edited by TMASTER; 10-20-2002 at 10:56 AM..

10-20-2002, 05:37 PM	#4
TMASTER Registered Member Join Date: Sep 2002 Location: TEXAS Posts: 161	I figure it out! My MSD A6 is dead! I hooked up my old ignition and it starts up right away! the MSD started poor anyway... Now i can make it to work on monday WOOHOOO FORD IGNITION!

10-19-2002, 11:54 PM	#2
HotRoddin cranky old man Join Date: Sep 2001 Location: Longview Texas Posts: 683	Define doesn't turn over ? Do you mean it doesn't fire or do you mean its doesn't turn at all as in frozen ?? If you mean frozen then take the plugs out then hit start to check for hydrolock (one of the cylinders full of liquid)