Seatbelt

MissBlondie · 12-06-2002, 07:53 PM

This might be a dumb question with no answer, but I thought I'd give it a shot. I know in the 01 and 02 mustangs if you don't put your seat belt on the car dings at you. Is there a way around this, or a cheap solution? I know it's the law, but if you're just sittin, talkin, etc. in your car, it's very annoying. Thought someone might be annoyed as well.

Thanks~ Jill

Extremestang · 12-06-2002, 08:04 PM

Jill,

Easy fix. There is a relay behind your center center console. Looking at your pedals(gas), look to your right. You have to be down by the floor while looking(its a pain in the arse). While the door is open, locate the (should be white or black) relay. Pull it out and there will be no more chiming noise. I'm not that familiar with the 99 and up models, but my guess is that they are the same as our 94-98 models. The best way to find it is to listen to where its coming from, if you get your hands back in there, you should be able to feels the vibration coming from the relay. Disconnect it. Hope this helps you out.

12-06-2002, 07:53 PM	#1
MissBlondie Registered Member Join Date: Nov 2002 Location: Chicago Posts: 335	Seatbelt This might be a dumb question with no answer, but I thought I'd give it a shot. I know in the 01 and 02 mustangs if you don't put your seat belt on the car dings at you. Is there a way around this, or a cheap solution? I know it's the law, but if you're just sittin, talkin, etc. in your car, it's very annoying. Thought someone might be annoyed as well. Thanks~ Jill __________________ 2003 TrueBlue GT with a few fun things...

12-06-2002, 08:04 PM	#2
Extremestang Registered User Join Date: Jun 2001 Location: North Carolina Posts: 176	Jill, Easy fix. There is a relay behind your center center console. Looking at your pedals(gas), look to your right. You have to be down by the floor while looking(its a pain in the arse). While the door is open, locate the (should be white or black) relay. Pull it out and there will be no more chiming noise. I'm not that familiar with the 99 and up models, but my guess is that they are the same as our 94-98 models. The best way to find it is to listen to where its coming from, if you get your hands back in there, you should be able to feels the vibration coming from the relay. Disconnect it. Hope this helps you out. __________________ Brian -1998 Ford Contour SVT #1199 of 6535 Bat y-pipe, Magnaflow Exhaust, MSDS headers, Bat intake tube, DMD, P/S & Alt Underdrives, Pro-M 75 mm MAF, K&N filter, Diablosport "tuned" Chip, Centerforce clutch, B&M short throw shifter and some suspension mods http://www.3.8mustang.com/forum/atta...chmentid=24993 -Former Car: 1995 Ford Mustang To many mods to list here..lost the car to Hurricane Isabel 9/18/03 http://www.3.8mustang.com/forum/atta...chmentid=23621

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Airbags suck	RPM427	Blue Oval Lounge	39	05-26-2008 09:43 AM
HELP! seatbelt won't click??	Coupe50h	Windsor Power	3	01-24-2004 01:03 PM
Seatbelt Bolts Stuck..........Please Help..	8950	Windsor Power	5	07-03-2001 08:41 PM
Seatbelt recall 99 mustangs	TechnoVixen	Built Ford Tough	0	06-13-2001 10:33 AM
What type of screw to remove seatbelt?	Gautam	Blue Oval Lounge	3	01-26-2001 04:48 PM