Which Belt for a/c and smog delete?

Coupe Devil · 06-19-2001, 04:42 PM

Does anyone know the right length or part number? I will probably just use an Autozone or Advance Auto belt.

------------------
'93 lx 4 banger, wrecked '90 lx 5.0, w/ t-5. .030 over fully ported and polihed (did that just to see if I could-first attempt at it). Motor and tranny in use for Ranger project.

Cocked, locked and ready to rock

Pony Power Forever

Stang_ROTY · 06-20-2001, 11:45 AM

Try GTR4060735. It's a place to start. That # is what March calls for if you buy their brackets out of the Summit catalouge. Summit is 1800 230-3030. Call them and they can help.

------------------
Almost done!
93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

QUIN · 06-20-2001, 12:10 PM

all you got to do is measure it with a string in the route the belt will go and then take it in and ask for that length serpentine belt. it will put you within a half inch and usually works the first time.
that is the best way to do it.
dont forget to 'tension' the tensioner pulley before you measure it with the string or it will throw you off.
Q

------------------
Quin, 87 GT,306,forged/cut pistons,edelbrock head\intake,steeda#18cam,1.7rr,MSD Blaster tfi coil,A9L,pro-m75mm,24#inj,accufab65mm,2.5"pipes,hooker headers,dynomax exhaust,3.73 gr,110 lph fp,moroso cold air,ASP pullies, weld rims

See my engine on user rides.

I see your shwartz is as big as mine, now lets see how well you handle it!

06-21-2001, 08:08 PM

A 75 from Autozone will work just fine.

Quote:

Originally posted by pony_power_90:
Does anyone know the right length or part number? I will probably just use an Autozone or Advance Auto belt.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
smog pump delete	89droptop	Windsor Power	11	03-15-2010 04:01 PM
Smog pump seized,can a guy run a shorter belt to run accessories?	Mustanguy	Windsor Power	12	09-08-2002 02:17 PM
a/c and smog delete	DemonGT	Windsor Power	3	05-20-2001 11:39 AM
smog pump delete	DemonGT	Windsor Power	3	05-15-2001 09:09 PM
Belt Fits without A/C Smog pump and underdrives	sedanman	Windsor Power	2	04-03-2001 03:52 PM

06-19-2001, 04:42 PM	#1
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Which Belt for a/c and smog delete? Does anyone know the right length or part number? I will probably just use an Autozone or Advance Auto belt. ------------------ '93 lx 4 banger, wrecked '90 lx 5.0, w/ t-5. .030 over fully ported and polihed (did that just to see if I could-first attempt at it). Motor and tranny in use for Ranger project. Cocked, locked and ready to rock Pony Power Forever

06-20-2001, 11:45 AM	#2
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Try GTR4060735. It's a place to start. That # is what March calls for if you buy their brackets out of the Summit catalouge. Summit is 1800 230-3030. Call them and they can help. ------------------ Almost done! 93 GT, Dynamic C4, 8 pt cage, chute, Sothside Machine bars & Sub-frames, 3.73's '69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

06-20-2001, 12:10 PM	#3
QUIN Registered Member Join Date: May 1999 Location: Chillicothe, OH. Posts: 1,289	all you got to do is measure it with a string in the route the belt will go and then take it in and ask for that length serpentine belt. it will put you within a half inch and usually works the first time. that is the best way to do it. dont forget to 'tension' the tensioner pulley before you measure it with the string or it will throw you off. Q ------------------ Quin, 87 GT,306,forged/cut pistons,edelbrock head\intake,steeda#18cam,1.7rr,MSD Blaster tfi coil,A9L,pro-m75mm,24#inj,accufab65mm,2.5"pipes,hooker headers,dynomax exhaust,3.73 gr,110 lph fp,moroso cold air,ASP pullies, weld rims See my engine on user rides. I see your shwartz is as big as mine, now lets see how well you handle it!