mismatched pullies, will it work?

90dpscoupe · 06-25-2001, 01:47 AM

Ok, so i have a steeda water pump pulley already, got it given to me, now i want to go buy the "asp" crank pulley, think this will be alright? i may already have an underdriven alt pulley, being its a ex highway patrol, either way im gonna skip the alt pulley, what you think?

------------------
90 lx coupe: 175k miles, steeda water pump pully, hurst shifter, Mac cold air fenderwell, accel supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods: subframes, mac h-pipe

Smokedawg · 06-25-2001, 07:57 AM

It will work okay no matter what size pulley you are running on the alt. All you will have to do is measure around the pulleys and make sure to leave abit of leaway for the tensioner. That will be what size belt you need. I am running the racing crank pulley, stock waterpump pulley and underdrive alt pulley.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

dinomite · 06-25-2001, 10:24 AM

Ya, those pulleys will work fine. when i put on my pulleys, i was able to re-use my stock size belt.

06-25-2001, 01:47 AM	#1
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	mismatched pullies, will it work? Ok, so i have a steeda water pump pulley already, got it given to me, now i want to go buy the "asp" crank pulley, think this will be alright? i may already have an underdriven alt pulley, being its a ex highway patrol, either way im gonna skip the alt pulley, what you think? ------------------ 90 lx coupe: 175k miles, steeda water pump pully, hurst shifter, Mac cold air fenderwell, accel supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone get ragged on at work for driving a Ford?	Crazy Horse GT	Blue Oval Lounge	25	03-10-2002 07:26 PM
Girl at work will not take NO for an answer!	Mercury	Blue Oval Lounge	8	12-05-2001 11:43 AM
Pullies	KidNotch4793	Windsor Power	1	03-11-2001 03:44 PM
will this work for forced induction?	mikos chris	Windsor Power	0	01-14-2001 03:05 PM
Need some professional advice - head work, valve springs, rockers, cam. pretty long.	AxemanZZ	Windsor Power	15	01-11-2001 01:30 PM

06-25-2001, 07:57 AM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	It will work okay no matter what size pulley you are running on the alt. All you will have to do is measure around the pulleys and make sure to leave abit of leaway for the tensioner. That will be what size belt you need. I am running the racing crank pulley, stock waterpump pulley and underdrive alt pulley. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

06-25-2001, 10:24 AM	#3
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	Ya, those pulleys will work fine. when i put on my pulleys, i was able to re-use my stock size belt.