Need ALL Emissions equipment - Please help

Stang_ROTY · 06-25-2001, 11:57 AM

I'm finally at the point where I need to order my emissions stuff. I'm running a 393 stroker (based on a'69 351W)w/EFI and I need all the sensors and emissions related stuff. I bought the car minus motor and tranny so I have NOTHING to swap fromthe 302. Fortunately, all my wiring harnesses came with the car. So far my list contains the EGR sensor, O2 sensors, TPS sensor, but I know there is much more than that. Isn't there sonething I need to do with the heads...like running a line from somewhere to the heads to recirculate emissions?? Also, do I need the cannister purge system to pass emissions?? I'm about a week away from putting the motor in so I'd appreciate all the help I can get. thanks

------------------
Almost done!
93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

Stang_ROTY · 06-26-2001, 07:24 AM

Thanks for all the help guys. Does anyone know what an ACT and ECT sensor is??

06-25-2001, 11:57 AM	#1
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Need ALL Emissions equipment - Please help I'm finally at the point where I need to order my emissions stuff. I'm running a 393 stroker (based on a'69 351W)w/EFI and I need all the sensors and emissions related stuff. I bought the car minus motor and tranny so I have NOTHING to swap fromthe 302. Fortunately, all my wiring harnesses came with the car. So far my list contains the EGR sensor, O2 sensors, TPS sensor, but I know there is much more than that. Isn't there sonething I need to do with the heads...like running a line from somewhere to the heads to recirculate emissions?? Also, do I need the cannister purge system to pass emissions?? I'm about a week away from putting the motor in so I'd appreciate all the help I can get. thanks ------------------ Almost done! 93 GT, Dynamic C4, 8 pt cage, chute, Sothside Machine bars & Sub-frames, 3.73's '69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
damn emissions	urstangsmoke	Modular Madness	10	03-27-2004 04:28 PM
AFR 165's emissions legal vs. non emissions legal	dragstang86	Windsor Power	1	12-11-2002 01:20 PM
Help identify this emissions equipment...	Jeb_Bush_2000	Windsor Power	6	04-05-2002 01:30 PM
Required Emissions Equipment and trannies	mysticclam	Windsor Power	0	07-04-2001 06:10 PM
HELP I need a carfax report!!! thanks to anyone that can help	89FHPLX	Windsor Power	6	05-30-2001 02:50 PM

06-26-2001, 07:24 AM	#2
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Thanks for all the help guys. Does anyone know what an ACT and ECT sensor is??