Trick-Flow and e303 need rocker help.

92Rustang · 06-28-2001, 05:47 PM

I'm thinking about going with the trick flow heads and my e303 cam. My problem is I was talking with Anderson today and they told me that trick doesn't warranty there head with Harland sharp rockers? Harland is one of the best rockers? They also said I would have P/V problems with the 1.7 rockers? I thought that some people here were running this combo. Any info would be great. The spec for the rockers are 1.73. Thanks for the help.

------------------
Check my site for mod
www.fordmustanggt.com

NOS_Notch · 06-28-2001, 05:52 PM

You better stick w/ 1.6's.
That sounds waaay to close w/ 1.73's

------------------
'88 coupe...stock as a rock.
Check out http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

92Rustang · 06-29-2001, 06:06 PM

Isn't there some guys running this combo on this board.

[This message has been edited by 92Rustang (edited 06-29-2001).]

PKRWUD · 06-29-2001, 09:06 PM

Check it with clay, but it should work fine. 1.7 rockers will bring your lift up to .529, and 1.73's will put it at .538. It's hard to get a straight answer from Trick Flow, but the general concensus there is that up to .540 lift is safe. You would be a fool to do it without checking it with clay first, no matter what anybody tells you.

Take care
~Chris

------------------
Retired Moderator
MustangNet
My site: JimPorterRacing
RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

06-28-2001, 05:47 PM	#1
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Trick-Flow and e303 need rocker help. I'm thinking about going with the trick flow heads and my e303 cam. My problem is I was talking with Anderson today and they told me that trick doesn't warranty there head with Harland sharp rockers? Harland is one of the best rockers? They also said I would have P/V problems with the 1.7 rockers? I thought that some people here were running this combo. Any info would be great. The spec for the rockers are 1.73. Thanks for the help. ------------------ Check my site for mod www.fordmustanggt.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow Street Heat	pete1	Windsor Power	1	07-02-2001 04:30 PM
Trick Flow cam	92Rustang	Windsor Power	2	04-11-2001 03:21 AM

06-28-2001, 05:52 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	You better stick w/ 1.6's. That sounds waaay to close w/ 1.73's ------------------ '88 coupe...stock as a rock. Check out http://www.burnouts.stangnet.com 11's coming soon!!!! Heads,intake and cam are all here

06-29-2001, 06:06 PM	#3
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Isn't there some guys running this combo on this board. [This message has been edited by 92Rustang (edited 06-29-2001).]

06-29-2001, 09:06 PM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Check it with clay, but it should work fine. 1.7 rockers will bring your lift up to .529, and 1.73's will put it at .538. It's hard to get a straight answer from Trick Flow, but the general concensus there is that up to .540 lift is safe. You would be a fool to do it without checking it with clay first, no matter what anybody tells you. Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!