heads and intake for 331??

DemonGT · 07-15-2001, 03:05 PM

will box stock TFS or AFR heads work ok on a 331? also..will a TFS street heat intake and 70mm TB work ok with it? i already have the TB and intake and i dont feel like buying all new..just got in on..and i dont want to have the heads worked at all...wanna keep it farly box stock..if anything id get the TFS stage 1 heads cause of the cost..any opinions about this?

------------------
'91 GT,91K,T-5,air silencer removed,HD clutch,K&N air filter,Mac long tubes,Cat-back,off road H,FMS 9mm wires,180 thermostat,Competition gauges,C&L 76mm MAF,Accufab 70mm TB,TFS street heat intake

Waiting install:Nothing

Future Mods:3.73's,Pro 5.0,TFS heads,TFS stage 1 cam,lakewood struts/shocks,nitto DR's
ICQ#35670781

SaleenGTS · 07-15-2001, 03:29 PM

Your picks will work excellent. I'd personally spend a extra 200$$ and but the Track upper though, the Street won't breathe as well with the 331, but will work ok. I'd still take the TW's over the AFR's only because they match up better, however the 185's are a little better than the TW's.

TW's flow about 255 @ .500
165's about 250 @ .500
185's abot 265 @ .550

The TW's are a lot cheaper too....about $1000

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

DemonGT · 07-15-2001, 07:19 PM

is the TFS street heat intake lower the same as the track heat??

SaleenGTS · 07-15-2001, 07:39 PM

Yup...Good Luck...feel free for any more ?'s though, I'd be happy to help.

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

07-15-2001, 03:05 PM	#1
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	heads and intake for 331?? will box stock TFS or AFR heads work ok on a 331? also..will a TFS street heat intake and 70mm TB work ok with it? i already have the TB and intake and i dont feel like buying all new..just got in on..and i dont want to have the heads worked at all...wanna keep it farly box stock..if anything id get the TFS stage 1 heads cause of the cost..any opinions about this? ------------------ '91 GT,91K,T-5,air silencer removed,HD clutch,K&N air filter,Mac long tubes,Cat-back,off road H,FMS 9mm wires,180 thermostat,Competition gauges,C&L 76mm MAF,Accufab 70mm TB,TFS street heat intake Waiting install:Nothing Future Mods:3.73's,Pro 5.0,TFS heads,TFS stage 1 cam,lakewood struts/shocks,nitto DR's ICQ#35670781

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do compare heads and intake.	GodStang	Windsor Power	4	02-01-2003 11:37 PM
ported stock intake and heads	explicitone	Windsor Power	0	04-18-2002 06:22 PM
SystemaxII intake and Box stock RPM heads	NewAge 5.0	Windsor Power	4	01-18-2002 12:52 AM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM
Cobra or Trick Flow intake with GT40P heads?	Shotgun28	Windsor Power	16	01-24-2001 04:15 PM

07-15-2001, 03:29 PM	#2
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Your picks will work excellent. I'd personally spend a extra 200$$ and but the Track upper though, the Street won't breathe as well with the 331, but will work ok. I'd still take the TW's over the AFR's only because they match up better, however the 185's are a little better than the TW's. TW's flow about 255 @ .500 165's about 250 @ .500 185's abot 265 @ .550 The TW's are a lot cheaper too....about $1000 ------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

07-15-2001, 07:19 PM	#3
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	is the TFS street heat intake lower the same as the track heat??

07-15-2001, 07:39 PM	#4
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Yup...Good Luck...feel free for any more ?'s though, I'd be happy to help. ------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg