what size transmission & rearend

whiterod · 10-04-2001, 03:03 PM

what size transmission and rearend come in a 94 V6 mustang automatic. is it the same automatic in the V8's and rearend?

------------------
GT-40X(58cc)heads, cobra upper&lower, FMS 65mm TB, 75mm Bullet, 24# injectors, 190 lph fuel pump, moroso cold air intake, BBK 1 5/8 equal length headers, flowmaster cat back, 1.7 cobra rockers, T5Z gear box, centerforce dual friction, mcleod bullet proof bellhousing, 3.55 gears, hurst billet shifter with over 185,000 miles. thanks to all who contributed

Unit 5302 · 10-04-2001, 07:29 PM

AOD for the tranny.

7.5" for the rear end.

Neither is V-8 spec.

84_GT350 · 10-04-2001, 08:51 PM

Ditto. Why has Ford kept using the 7.5" rear end? It wasn't cool in the first half of the 80s and it sure as hell isn't cool now.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

So I pushed it up to 110,
That flathead motor was about to give in,
I crossed my fingers and prayed to the lord,
Don't let me down you fuct up ford!"

"5-Oh Ford" by The Reverend Horton Heat

10-04-2001, 03:03 PM	#1
whiterod Registered Member Join Date: Sep 2001 Location: zachary, la Posts: 73	what size transmission & rearend what size transmission and rearend come in a 94 V6 mustang automatic. is it the same automatic in the V8's and rearend? ------------------ GT-40X(58cc)heads, cobra upper&lower, FMS 65mm TB, 75mm Bullet, 24# injectors, 190 lph fuel pump, moroso cold air intake, BBK 1 5/8 equal length headers, flowmaster cat back, 1.7 cobra rockers, T5Z gear box, centerforce dual friction, mcleod bullet proof bellhousing, 3.55 gears, hurst billet shifter with over 185,000 miles. thanks to all who contributed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
C-4 transmission	420nitro	Windsor Power	1	12-11-2003 11:10 AM
My transmission problems	waynesutton	Small Ponies	0	09-06-2002 01:36 PM
What size rearend in a 86GT?	Smokedawg	Windsor Power	4	11-14-2001 02:20 PM
Rearend size, still not sure	MrClean	Windsor Power	6	09-05-2001 01:54 PM

10-04-2001, 07:29 PM	#2
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	AOD for the tranny. 7.5" for the rear end. Neither is V-8 spec.

10-04-2001, 08:51 PM	#3
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Ditto. Why has Ford kept using the 7.5" rear end? It wasn't cool in the first half of the 80s and it sure as hell isn't cool now. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s So I pushed it up to 110, That flathead motor was about to give in, I crossed my fingers and prayed to the lord, Don't let me down you fuct up ford!" "5-Oh Ford" by The Reverend Horton Heat