Heads/Cam????

gt93mustang · 03-27-2001, 07:52 PM

What is your budget for the heads and cam? The Edelbrock's are good heads, but there are definitely better heads out there if your bank account will allow. As mentioned, the AFR's are one of the better heads on the market.

As far as installing tips, don't forget to add all the prices for gaskets, oil, RTV, coolant, new lifters (if necessary) new timing chain, new pushrods (again, if necessary, etc.... All the little things add up to alot of money on top of the price of the heads and cam.

How many miles on your motor? What other mods do you have?

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Windsor with heads/cam	Big Thumper	Windsor Power	5	07-14-2002 01:00 AM
heads/cam or stroker	DemonGT	Windsor Power	12	06-27-2002 08:22 AM
heads/cam install...need list of whats all needed	DemonGT	Windsor Power	4	04-12-2002 05:48 PM
Who has done heads/cam swap?	dinomite	Windsor Power	12	06-21-2001 04:51 PM
Nitrous or Heads/Cam	evilmustang	Windsor Power	8	03-24-2001 12:22 AM

03-27-2001, 07:52 PM	#3
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	What is your budget for the heads and cam? The Edelbrock's are good heads, but there are definitely better heads out there if your bank account will allow. As mentioned, the AFR's are one of the better heads on the market. As far as installing tips, don't forget to add all the prices for gaskets, oil, RTV, coolant, new lifters (if necessary) new timing chain, new pushrods (again, if necessary, etc.... All the little things add up to alot of money on top of the price of the heads and cam. How many miles on your motor? What other mods do you have? ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot