Head Gaskets, Header Gaskets, Intake Gaskets, etc

Rick 91GT · 01-11-2001, 01:09 PM

Well either the Ford graphite or the ROL graphites for the heads. I am currently running ther Felpro's with the renforced ring for alum. heads but I am swapping to the ROL's graphites this winter $35.00 a pair. I am also going to go to the ROL rubber valve cover gaskets they will absorb 75% of their weight in oil, I have heard many good things about them, I think my stock metal/rubber have seen better days they are starting to leak on the back side. As for the headers get some thing good, just about everybody has gaskets, but I am going to go with the metal Ultra seals while mine is apart. I also like the Stage 8 locking header bolts a very good investment.

Rick

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

[This message has been edited by Rick 91GT (edited 01-11-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
head gaskets...GOOD ones	88workcar	Windsor Power	9	03-26-2003 06:06 AM
Intake and head advice	taurus3298	Windsor Power	3	05-09-2001 06:55 PM
Head ID and Extrude-honed Upper intake	RSE1805	Windsor Power	1	03-23-2001 05:03 PM
Gaskets - Which ones and where do I get them from? Please help quick.	2FastLX	Windsor Power	1	03-14-2001 12:08 PM
Where to get TFS intake gaskets?	gt93mustang	Windsor Power	1	02-04-2001 05:09 PM

01-11-2001, 01:09 PM	#9
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Well either the Ford graphite or the ROL graphites for the heads. I am currently running ther Felpro's with the renforced ring for alum. heads but I am swapping to the ROL's graphites this winter $35.00 a pair. I am also going to go to the ROL rubber valve cover gaskets they will absorb 75% of their weight in oil, I have heard many good things about them, I think my stock metal/rubber have seen better days they are starting to leak on the back side. As for the headers get some thing good, just about everybody has gaskets, but I am going to go with the metal Ultra seals while mine is apart. I also like the Stage 8 locking header bolts a very good investment. Rick ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98 [This message has been edited by Rick 91GT (edited 01-11-2001).]