Calling anyone who relocated the MAF Sensor

Tony91LX · 04-08-2002, 08:40 PM

Did you make you own extension harness or did you buy one, If you made it what type of connector would you recommend?

(I hate electrical and any thing that will make my life easer I need to know about. That’s why I wanted to buy a pre-made harness)

I know that Interactive Systems & Technologies makes one but I think they went out of business, or something because no one has been returning my calls

I moved my MAF sensor to the drivers side fender well to make my procharger setup a suck through on the MAF, rather than a blow through running a 80mm C&L Meter

drudis · 04-09-2002, 08:44 AM

I made my own.
Cut the wire between the connectors, then soldered 12" of wire, heat-shrink tubing, little electrical tape...

Forcedpower · 04-09-2002, 11:20 AM

I bought one from Teaxs Mustang. I hate cutting factory wires I think it was around $20.

04-08-2002, 08:40 PM	#1
Tony91LX Registered Member Join Date: Jan 2000 Location: Feeding Hills, MA Posts: 114	Calling anyone who relocated the MAF Sensor Did you make you own extension harness or did you buy one, If you made it what type of connector would you recommend? (I hate electrical and any thing that will make my life easer I need to know about. That’s why I wanted to buy a pre-made harness) I know that Interactive Systems & Technologies makes one but I think they went out of business, or something because no one has been returning my calls I moved my MAF sensor to the drivers side fender well to make my procharger setup a suck through on the MAF, rather than a blow through running a 80mm C&L Meter

04-09-2002, 08:44 AM	#2
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	I made my own. Cut the wire between the connectors, then soldered 12" of wire, heat-shrink tubing, little electrical tape... __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

04-09-2002, 11:20 AM	#3
Forcedpower Registered Member Join Date: Aug 1999 Location: Charlottesville, Va, USA Posts: 328	I bought one from Teaxs Mustang. I hate cutting factory wires I think it was around $20. __________________ 93 LX R331/AFR 205/Vic 5.0/? psi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I got a free mass air sensor	stevstum	Windsor Power	2	05-27-2003 12:50 PM
Whats the best way to tell if your running lean or rich?	K.C. 5.0	Windsor Power	9	09-10-2001 03:04 PM
Sensor on Top of T5?	Green92LX	Windsor Power	13	07-29-2001 10:11 PM
Temp sensor question	RB92GT	Windsor Power	2	06-23-2001 12:23 PM
MAF Sensor Location	Mike Mileski	Windsor Power	3	06-12-2001 11:10 PM