changing lifers any tips??????

[Rick 91GT]

Originally posted by 93CobraR:
There is no lifter removal tool. Your talking about the magnets that go down the push rod holes to keep the lifters from falling in, when you do a cam swap. You need the tool to remoce the fuel lines, I would take the distributor out because it's alot easier to get the intake out. Other then that it's easy, make sure to soak the lifters in oil over night.

I agree with 93CobraR, defintely pull the distributor. You can swing the AC out of your way and let it lean on the passenger side fender. The fuel line tools are cheap $15 or so. Make sure you keep the shims matched to the rockers when you pull them out so you can put them all back in the same way.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!