need help with a 94 GT

Smokedawg · 06-07-2001, 12:55 PM

Sure there is..
Trick Flow Heads----about 1200
High Flowing Intake-about 500
Underdrive Pulleys--about 90
70mm Throttle Body--about 200
Mass Air------------about 150
Cold Air Induction--about 200

Its not to cheap but seems to me like this would get you there or damn close to it..but then u will need subframes..some sort of traction device
And some good tires.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

[This message has been edited by Smokedawg (edited 06-07-2001).]

[This message has been edited by Smokedawg (edited 06-07-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raced a 99 GT 5-speed	StoplightWarrior	Stang Stories	4	05-15-2002 09:13 PM
1988 Gt - 1998 Gt Hp Each Year	steedamustang01	Modular Madness	13	05-09-2002 07:26 PM
1996 Cobra vs 2000 Mustang GT	Milktasd	Stang Stories	2	04-05-2002 03:11 AM
RESULTS - Grand Prix GT vs. Celica GTS	302 LX Eric	Stang Stories	7	09-25-2001 06:46 PM
Just got my '89 GT! Time slip guesses?	84stangLX	Blue Oval Lounge	6	07-25-2001 09:44 PM

06-07-2001, 12:55 PM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Sure there is.. Trick Flow Heads----about 1200 High Flowing Intake-about 500 Underdrive Pulleys--about 90 70mm Throttle Body--about 200 Mass Air------------about 150 Cold Air Induction--about 200 Its not to cheap but seems to me like this would get you there or damn close to it..but then u will need subframes..some sort of traction device And some good tires. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del. [This message has been edited by Smokedawg (edited 06-07-2001).] [This message has been edited by Smokedawg (edited 06-07-2001).]