Adaptive fuel limit... what is this??

[mike72678]

when your eec is in adaptive mode , that means that is learning (closed loop only) .with a mas calibrated for 19 lb. running 24 lb. you will run very rich , and it is too much for the computer to adjust for unless you have a custom burned chip. i would try putting the pro m back in and make sure it is in the stock location , also if you have a cone filter clamped directly onto the mas , i would try removing that and putting some kind of tubing in front of the mas before the filter , also you can try actually rotating the mas about 45 degrees either way . these are just a couple of known problems that can disrupt airflow to the mas and cause false readings . hope this helps .