FRPP A/C Delete

[rayb]

I have and installed the same kit and it works great. I agree a bit tricky though w/o instructions. I was going to post a picture, but don't have a good one. I'll do my best to describe it in words... 1) Attach the silver bracket to the cylinder head (as you mentioned). The shorter bolts should be used for this. This piece has two "towers" or gussetted protrusions in the middle of the piece. These will be used to mount the PS pump and the slightly longer one should go down. 2) Mount the black bracket to the water pump. Use the existing studs for this with new nuts. Two studs will hold this bracket on and there's a hole in it to clear a another stud in the center of the bracket. This piece is in an S-shape and should be mounted so it sticks out towards the front of the car. 3) Slide the pump up between the silver and black brackets. Use the 2 long bolts provided to screw the pump into the 2 threaded holes in the silver bracket.

Hope this helps. Let me know if you have any questions...