damn,mutha,sh*t,kok. 'top secret' way to get the trans aligned??

[Rick 91GT]

Originally posted by 88PONY:
I had the same problem. If you have the bellhousing already on, then hook up the cable to the fork. Then have someone step on the pedal as you put the trans in. It should pop right in. It did for me. It sound kinda half a$$ed, but it worked and there were no alignment problems when I took it out again.

Good luck

That way works very good and is easy to do. I had the same issue even though I was sure it was aligned perfect.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree