Beginner Questions

StangFlyer · 10-22-2004, 05:39 AM

Quote:

Originally Posted by RacePro_Engineering

(1) We are considering the purchase of a 1989 (Fox) GT. Did the factory offer various power options in the 5.0L? If so, what were they? If not, what is the nominal HP and torque of the factory motor? Flywheel? Rear Wheels?

The 1989 Ford Mustang was rated at 225 HP and 300 ft/lbs of torque from the factory. You'd see around 195 HP at the rear wheels probably in stock trim. That was the only engine option. You either had a 4-cylinder or the 5.0L engine.

Quote:

Originally Posted by RacePro_Engineering

(2) Did the factory offer any options to the 5-speed, its gear ratios, or to the final drive ratio? If not, what are the factory standard ratios?

The only option I know of off hand was that you could order a Mustang through those rears with a 3.08 rear-end gearset versus the standard 2.73 gearset. Either AOD or Borg Warner T5 manual.

Hope that helps...

tmoss · 10-22-2004, 07:29 AM

Stangman meant to type 2:73 standard gear set.

andy669 · 10-22-2004, 08:06 AM

Quote:

Originally Posted by tmoss

Stangman meant to type 2:73 standard gear set.

Huh? Whats 2:73?

Andy

RacePro_Engineering · 10-22-2004, 09:32 AM

Gentlemen,

Thanks so much for the rapid response. We now have much more informed questions to ask.

Best regards,
Ed LoPresti

tmoss · 10-22-2004, 11:43 AM

sneaky - you changed it.

I should have used the quote button.

To the question about rans ratios.........see the attached.......

StangFlyer · 10-22-2004, 01:24 PM

Quote:

Originally Posted by andy669

Huh? Whats 2:73?

Oh geez.. It was too early in the morn when I read that. Yeah, he was was asking for trans gear ratios and I was giving him rear end ratios. hahaha.

tmoss · 10-22-2004, 01:31 PM

He did ask for final drive ratios which I also took to mean rear end ratios, but I SWEAR your first response had 3.73 as the standard factory ratio and I thought it was a typo. No matter, he got his info.

StangFlyer · 10-22-2004, 01:33 PM

Quote:

Originally Posted by tmoss

He did ask for final drive ratios which I also took to mean rear end ratios, but I SWEAR your first response had 3.73 as the standard factory ratio and I thought it was a typo. No matter, he got his info.

It was. I think I was editing the post to correct my typo right as you were posting your response pointing it out or something.

10-22-2004, 07:29 AM	#2
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 634	Re: Beginner Questions Stangman meant to type 2:73 standard gear set. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

10-22-2004, 09:32 AM	#4
RacePro_Engineering Registered Member Join Date: Oct 2004 Posts: 2	Beginner Questions Answered Gentlemen, Thanks so much for the rapid response. We now have much more informed questions to ask. Best regards, Ed LoPresti __________________ RacePro Engineering New York

10-22-2004, 01:31 PM	#7
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 634	Re: Beginner Questions He did ask for final drive ratios which I also took to mean rear end ratios, but I SWEAR your first response had 3.73 as the standard factory ratio and I thought it was a typo. No matter, he got his info. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NO2 Questions from a beginner	xxxBlakexxx	Power Adders	26	03-20-2004 01:17 AM
speedy density to mass air questions	thdrcat	Windsor Power	3	09-25-2003 09:20 PM
Several questions about oil.	zepherman	Windsor Power	3	08-03-2002 06:59 AM
a few nitrous beginner questions	fiveohpatrol	Windsor Power	5	05-14-2002 10:34 PM
questions for beginner	GreeceLightning	Windsor Power	6	05-28-2001 01:06 PM