Info on 351w strokers

[ricechefmerkl]

Are they actually called a clevor head ? or do you me Cleveland heads? if so which ones ? the 2bl or the 4bl design ? Because each design has a unique personality , The 2bl heads out flow the 4bl heads down low but just peak really quick and stay there while 4bl catch the 2bl right around .300 lift and fly by them them , this makes the 2bl acually a way nicer street head to use it your looking at a small cam , if you go bigg on cam 4bl heads are your freind . LOL now to think of it your going the exact rout i had planned be for I decided to say to hell with it and make the fastest street car in my area which is coming together .... If they are cleveland heads what are you doing to mate them to the windsor the special intake or the adapter plate , I wanted / still want to make one so if you can give me some info on what your doing with it etc. ...Also if i remeber right you have to run a special cut piston with the cleve heads cuz of the canted valve design .. if you need to know more i have pile of info on the clevor engine mods that need to be done just ask

[Dave_mustang_50]

Yes, by cleavor I meant Cleavland heads. I have the 2v open chamber heads 2.041 int. 1.654 ext.
There is a really great article on this in Mustang Enthusiast August issue. The title is "Building a Track Boss" if your interested.
Theres a link to www.Indymustang.stangnet.com
They sell all parts needed as well as complete kits.

[ricechefmerkl]

lol exactly what i was going to do , i have a set ( well three) that i spent 8 hours glass beadin at school when i was planning a cheap streeter motor , which i will probally do with my 79 block after the right bits show up for our boreing bar so i can put a sleeve in it at i put my 69 block .030 over , i had never seen a piston let go like the one in the 79 block though it just ripped apart right at the pin bosses and wedged the piston in a angle in the cylinder , and well round things only fit good in a round hole when they are flat i guess when you try to turn then side ways in there they do some damage who would have figured hey lol

[Dave_mustang_50]

Just curious, have you found any sites that have run this setup? I guess its not too common.

[ricechefmerkl]

I can`t remeber it was about 6 months ago i was looking and debating the clevor idea , but i did remeber the best place you will find stuff about them and people running them would be in a "roundy round" message board all those stock car ford guys tend to run them to take advantage of the oiling of the windsor and the flow of the cleveland , when you think about it and how easy it is you must ask your self "ford why did you just do this to the 302 and not give the 351 the chance with good heads ?" ( the boss 302 basically a clevor ) what all do you need to know i can give ya hand with a bit
like where to find the adapter plates for the intake , or the whole intake , i`ll have to search but i know i have the info some where