new heads

Dark Knight · 07-28-2006, 05:44 AM

I'll guess 293/310 at the wheels

bailey_57 · 07-30-2006, 11:55 PM

couldn't do both so i went with the heads instead of the new motor, this time i replaced the pushrods and lifters, i also went with harland sharp 1.6 rr's. 293/310 sounds good i definitely want 300 to the ground but also realize thats pushing it. we'll be keeping the fingers crossed.

07-28-2006, 05:44 AM	#1
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	Re: new heads I'll guess 293/310 at the wheels __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

07-30-2006, 11:55 PM	#2
bailey_57 Registered Member Join Date: Mar 2000 Location: Berwick,Pa Posts: 127	Re: new heads couldn't do both so i went with the heads instead of the new motor, this time i replaced the pushrods and lifters, i also went with harland sharp 1.6 rr's. 293/310 sounds good i definitely want 300 to the ground but also realize thats pushing it. we'll be keeping the fingers crossed. __________________ '89 GT hatch back performer rpm intake, performer rpm cylinder heads, fms e-303 cam, kirban adj fp regulator, holley 65mm tb, harland sharp 1.6 roller rockers, alum driveshaft, 3.73 gears (283 rwhp, 303 rwtq new numbers with new heads)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM