

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#2 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
![]() thats not the TPS, your tps is on the top of the throttle body and it cant be cleaned, if defective then it has to either be re-adjusted or replaced
first thing i'd do is to remove the intake tube and see if there is anything that is stopping the throttle body valve from shutting all the way you also will want to check to make sure that your throttle cable isnt pinched and isnt letting the cable retract all the way (happened to me before) you'll want to do these with the car off ofcourse, have someone looking in the throttle body as your sitting inside the car hitting the pedal it could also be your TPS i believe, i can't remember exactly what to adjust it to off the top of my head (maybe .96volts), someone else here will help you further with that hope i helped a little bit, good luck ------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, full exhaust,65mm TB, Nitto DR's, new best 1/4--> 13.42@106.18 (1.89 short time) |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need Throttle Body & Idle Conrol Valve Info | BigBobsL | Windsor Power | 2 | 02-10-2004 01:16 AM |
throttle cable removal on an 88 lx 5.0 | c3racer2000 | Windsor Power | 5 | 02-10-2003 12:45 PM |
Bbk/edelbrock Throttle Body Sticking | sn95gt19 | Windsor Power | 4 | 06-25-2002 02:01 PM |
Stuck throttle about to cause serious problems | stock89 | Windsor Power | 2 | 04-27-2002 12:15 PM |
Throttle Cable hook up | Ponch65 | Classic Mustangs | 2 | 05-06-2000 02:48 PM |